Used Material Handling in Bremen, Germany

Stainless steel container 117 cbm

• Manufacturer: Sielmann

Design: Upright cylinder with inwardly curved lower conical base, concrete base, with upper conical base. Propeller agitator installed at an angle in the cylinder. Insulation around the cylinder, fully welded cov...

Stainless steel container 0.95 cbm

• Manufacturer: Sielmann

Content: 0,95 cbm | Material: stainless steel | Material specification: VA 1.4404 | Diameter: 950 mm | Cyl. height: 1080 mm | Per floor: 200 mm | Ground clearance: 900 mm | Total height: 2380 mm | Piece: 1 | Sto...

Stainless steel container 5.9 cbm

• Manufacturer: Sielmann

Design: cylindrical standing on 3 feet made of Fe with curved bases. Connections: 1 dome DN 500 in the upper base side as well as 1 x DN 200 in the middle, 1 x DN 150 in the cylinder, 1 x DN 100 and 2 x DN 250. O...

Stainless steel container 3.85 cbm, insulated

• Manufacturer: Sielmann

Operating data: -0.07/+0.4 bar operating pressure +20/+90 °C operating temperature according to nameplate Design: cylindrical hanging on 3 claws with curved bases Insulation around cylinder and lower base, stainl...

Stainless steel container 2.4 cbm, insulated

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, with conical bases, insulation around the cylinder and lower base, fully welded stainless steel cover. Connections: 1 hinged lid dome DN 450 in the upper base, centered ve...

Stainless steel container 0.26 cbm

• Manufacturer: Sielmann

Design: cylindrical standing on 3 feet, open at the top, with a curved bottom and a baffle inside. Connections: spray ring line at the top, 1" spout, projecting next to it 1x 1" with bend.

1000 liter container, Aisi 316

Volume: 1.000 liter | Lower bottom: eccentric cone shaped bottom | Stand type: cage | Diameter inside: 1.130 mm | Cylindrical height: 930 mm | Total height: 1.680 mm | Total width: 1.220 mm | Total length: 1.220...

1950 liter bulk container, Aisi 316

remarks: Foot frame, 304; slight differences in design; the manhole cover is missing in 2 containers, and the clamping ring of the manhole cover is missing in the third container

Stainless steel container 25.6 cbm

• Manufacturer: Sielmann

Operating data: Operating pressure 0.5 bar, as per nameplate Design: Cylinder standing on three feet, height-adjustable, with conical bottoms. Heating via pillow plates on the cylinder and one circuit on the lowe...

Transport container 3 cbm

• Manufacturer: Sielmann

Wall thickness: 3 mm on all sides Design: Rectangular with a reinforced flat top and conical bottom with forklift pockets and internal struts Connections: 1 x manhole 340 x 440 on the side, 1 x Ø 250 opening in t...

Stainless steel container 5.5 cbm, insulated

• Manufacturer: Sielmann

Design: cylindrical, suspended on 4 claws with conical bases. Insulation around the cylinder, fully welded stainless steel cover. Connections: 1 manhole DN 500 in the upper base. 1 spray head in the center, 1 x D...

Stainless steel container 2.6 cbm, insulated

• Manufacturer: Sielmann

Design: cylindrical, standing on three feet, flat lid on top, hinged on both sides, with conical bottom base, insulation around the cylinder, fully welded stainless steel cover Connections: 1 x DN 65 in the lid, ...

Stainless steel container 2.2 cbm, insulated

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with bracing, with a flat upper cover, divided into two parts and hinged, and a lower conical base with a spout cup. Insulation around the cylinder, low...

Stainless steel container 2.1 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on three FE feet with a domed upper end and a conical lower end, with 50 mm wide insulating rings. Connections: 1 DN 500 dome in the upper end, 4 x DN 251 x DN 50 and a DN 150 block ...

Stainless steel container 28.5 cbm

• Manufacturer: Sielmann

Design: cylindrical, horizontal in a galvanized steel frame, on bearing saddles, height-adjustable, with curved bottoms. Connections: 1 manhole 340 x 440 mm in the front end, 1 x DN 101 x DN 50 on the upper apex ...