Used Machine Tools in Saxony, Germany

BILZ leveling shoe

Leveling shoe, machine foot, wedge foot, free-standing, 2 pieces BILZ 4-VRC New !

DECKEL clamping drive

• Manufacturer: Deckel / Maho

Clamping drive, manual with fine adjustment DECKEL spare part for milling machine DECKEL KF12 ! used, tested !

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW dividing head

• Manufacturer: WMW

Dividing head WMW Ø 45 mm tip height 100 mm 360° rotatable used, tested !

DECKEL trapezoidal threaded spindle

• Manufacturer: Deckel / Maho

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

WMW DU 250 AS

• Manufacturer: WMW

Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck

TOS dividing head

• Manufacturer: TOS

Dividing head, dividing head, dividing table, with tailstock TOS KURIM Type DU200AN Dividing head: Holder: Inner diameter: Ø 48 mm, depth: 50 mm -10° - +100° tiltable Tailstock with quill and fixed center point u...

IMA Norte VS 800 470x340x120

• Manufacturer: Norte

from a BAZ IMA NORTE VS 800 - clamping plates, without eyelets T-slots to DIN 650 - a = 14mm; h = 26mm; b = 24mm; c = 11mm T-slot centerstand = 125mm - side-slot left and right = width: 20mm

1970 WMW AP 865x780x40

• Manufacturer: WMW

surface plate with 3 base stands Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 865 mm | Table width: 780 mm | Table height: 40 mm | Height over ...

1987 TOS - KURIM DU 250 AS

• Manufacturer: TOS Kuřim

Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving ...

1985 WMW 3880x1390

• Manufacturer: WMW

distance of t-slots=250mm T-slot size: a=28mm b=50mm c=24mm h=52mm

WMW SP 4750x1850x200

• Manufacturer: WMW

steel plate are available for sale. T-slots according to DIN 650 a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm

1988 Krups AP 4000x2000x460

• Manufacturer: Krups

2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm The plates are equipped for lateral fixing.

WMW AP 510x270x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...