Used Machine Tools in Saxony, Germany

Trusted Seller
WMW dividing head
- Manufacturer: WMW
Dividing head WMW TU 100 ( TU100 ) used, tested ! dimension 440 x 400 x 230 mm
$517 USD
Zschepplin, Germany
Trusted Seller
WMW DU 250 AS
- Manufacturer: WMW
Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck
Leipzig, Germany
Trusted Seller
IMA Norte VS 800 470x340x120
- Manufacturer: Norte
from a BAZ IMA NORTE VS 800 - clamping plates, without eyelets T-slots to DIN 650 - a = 14mm; h = 26mm; b = 24mm; c = 11mm T-slot centerstand = 125mm - side-slot left and right = width: 20mm
Leipzig, Germany
Trusted Seller
1970 WMW AP 865x780x40
- Manufacturer: WMW
surface plate with 3 base stands Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 865 mm | Table width: 780 mm | Table height: 40 mm | Height over ...
Leipzig, Germany
Trusted Seller
1987 TOS - KURIM DU 250 AS
- Manufacturer: TOS Kuřim
Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving ...
Leipzig, Germany
Trusted Seller
WMW 4-jaw chuck
- Manufacturer: WMW
4-jaw chuck WMW Original Perthel Machine side: Mounting ring: Diameter: Ø 217 / 190 mm, Width: 13 / 16 mm with chuck key Used, tested!
$329 USD
Zschepplin, Germany
Trusted Seller
1985 WMW 3880x1390
- Manufacturer: WMW
distance of t-slots=250mm T-slot size: a=28mm b=50mm c=24mm h=52mm
Leipzig, Germany
Trusted Seller
TOS dividing head
- Manufacturer: TOS
Dividing head, dividing head, dividing table, with tailstock TOS KURIM Type DU200AN Dividing head: Holder: Inner diameter: Ø 48 mm, depth: 50 mm -10° - +100° tiltable Tailstock with quill and fixed center point u...
$728 USD
Zschepplin, Germany
Trusted Seller
KENNAMETAL shrink fit chuck
- Manufacturer: Kennametal
Shrink fit chuck, shrink fit chuck KENNAMETAL HSK A100x25x115 HSK100ATT25115M New !
$329 USD
Zschepplin, Germany
Trusted Seller
WMW SP 4750x1850x200
- Manufacturer: WMW
steel plate are available for sale. T-slots according to DIN 650 a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm
Leipzig, Germany
Trusted Seller
1988 Krups AP 4000x2000x460
- Manufacturer: Krups
2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm The plates are equipped for lateral fixing.
Leipzig, Germany
Trusted Seller
WMW AP 510x270x65
- Manufacturer: WMW
very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...
Leipzig, Germany
Trusted Seller
POKOLM shrink feed kit
- Manufacturer: POKOLM
Shrink fit chuck set, shrink fit chuck POKOLM 50 Ø 750 S SK 40 used, tested !
$376 USD
Zschepplin, Germany
Trusted Seller
WMW ALU 4200x2000
- Manufacturer: WMW
Aluminum plate with 800 clamping holes, M8; countersunk Ø 11,5 x 15mm with 4 clamping holes, M24 The plate is placed on a wooden support frame.
Leipzig, Germany
Trusted Seller
WMW ALU 4000x1700
- Manufacturer: WMW
Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands...
Leipzig, Germany