Used Heat Exchangers in Utrecht, Netherlands

Stork DS 1525

• Manufacturer: Stork

Tubular flow sterilizer, Temperature cycles: 10-90-130/145-30-60 degrees Celcius. Including: pump, balance tank, temperature indicators. With indirect heating with steam and manual temperature control.

1988 Stork Sterideal

• Manufacturer: Stork
• Model: STERIDEAL

Stork Sterideal. UHT line, consists of Stork UHT, Tubular indirect heating, 4 sections of triple tube (tube in tube in tube), Stork holding tube and Skid with infeed tank. new Tubular heatexchanger in 2012 only u...

2004 Alfa Laval Spiraflo 1x2 VLM 4x18/63-60-316L/304D

• Manufacturer: Alfa-Laval

Alfa Laval Spiraflo 1x2 VLM 4x18/63-6.0-316L/304D 2 tubular spiraflow pipes. Length pipe: 5,70 mtr. Total: 6,15 mtr. Heat transfer area: 1,29 m2 per pipe

Armfield FT 43-A-A

• Manufacturer: Armfield

Armfield Laboratory Pasteurizer FT 43A. With controls. Set consists out of feed tank, pump, plate heat exchanger, hot water tank, pump, holding and diverter valve. Total dimensions: 76x55x65 (lxwxh) cm - weight ...

APV 3HD672

• Manufacturer: APV

Scrape surface heat exchanger. 2 product cylinders. Tube Ø 150 mm. Surface per tube 0,84 m². 1x Main motor which drive both dashers. Previous used on heating media: steam. Pressure product side: 12 bar. Pressure ...

1991 GEA Ahlborn VT 4

• Manufacturer: GEA

Plate heat exchanger, sanitary (PHE). Max working pressure: 6 bar. Beam length: 165 cm, connections: 4x2" Din. Current configuration: 1 Section: 50 plates. Connections follower: 2 up/2 down. Dimensions: 38x17,5x5...

2009 Alfa Laval Front 8-RH

• Manufacturer: Alfa-Laval

Plate heat exchanger, sanitary (PHE). Pressure: 16,0 bar, Beam length: 120 cm, connections: 4x3" DIN. Current configuration: 1 sections: 81 plates. Design temperature 0/120 °C. - Connections head: 2 down, followe...

1977 Crepaco/APV 1HRT-672

• Manufacturer: Crepaco

Sraped Surface heat exchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10...

2013 Alfa Laval Front 8 RM

• Manufacturer: Alfa-Laval

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar - beam length: 180 cm, connections: 8 x 3" Din. Currenct configuration: 3 Sections: 37-48-36 plates (total 121 plates) - Connections head: 2 up and 2 down,...

Crepaco 1VT422

• Manufacturer: Crepaco

Scraped surface heat exchanger (SSHE). 1 Vertical Product cylinder, tube: Ø 96 mm, length 1,500 mm, rotor Ø 38 mm with 2 scrapers. Cylinder material: stainless steel. Surface per tube 0,19 m² and volume per tube ...

N.N. SS insulated lab holding

• Manufacturer: N.N..

Laboratory insulated mobile holding with 3 loops. A.) 1.66 l - 1 min. 100 l/h. B.) 3.32 ltr - 2 min - 100 l/h. C.) 3.23 ltr - 2 min - 100 l/h. Connections: 2 x 1" Din - 2 x 15 mm Din. Total dimensions: 80x43x105 ...

N.N.. SS

• Manufacturer: N.N..

Double jacketed pin mixer. Shaft diameter 85 mm, 3 rows with 14 pins (42 pieces total) - cylinder diameter 250 mm with 2 rows with 19 and 20 (total 39) pieces. Cylinder length 195 cm. Connections: 2 x 2" Din and ...

Tubular Heatexchanger

Monotube, inner diameter (product) 23mm outer diameter (water) 40mm, 42 tubes x 3 mtr each. total dimensions: Length 3.00 mtr x Width 1.30 m, Height 1.50 mtr. On a stainless steel frame. Flexible in using, many l...

1972 Paasch & Silkeborg H-3575

• Manufacturer: Paasch & Silkeborg

Tubular Heatexchanger 36 tubes, total dimensions: L 320cm X W 80cm X H 140cm

2006 Alfa Laval C10-SR

• Manufacturer: Alfa-Laval

Design pressure: 10.0 bar, design temperature: -10 / 110 ° C, test pressure (Gauge): 13.0 bar