Used Cnc Lathes in Nuevo León, Mexico

HL 44

Motor power 20 HP, 16 speeds. 5.98″ spindle pitch. One-piece base with extra thick seams. Push button to engage speeds. One stroke lubrication for apron, carriage and guides. 2-speed countershaft. Magnetic clutch...

HW 26

15 HP, 12-speed main motor. 4.5″ (115 mm) spindle pitch. Hardened and ground spindles, guides and gears. One-piece solid cast base and ground guideways for rigidity. Full length pedal brake. Button to engage gear...

ML 2060T

7.5 HP main motor, 12-speed. 3.125″ spindle pitch. Solid bed over the entire casting length with front tray for fast chip removal. Adjustable clutches for overloaded feeds. Quick reverse lever on apron. Full-leng...

KLS 1760II

Engine power 6 HP. Gear box (12) speeds. Hardened and ground guides. Centralized lubrication system in the headstock. Cast iron base and bed. Tray for quick chip cleaning. Pedal brake. Inch and millimetre dials. ...

KVT 75E

Up to 39.3″ maximum swing diameter and 27.5″ maximum swing length. Up to 43.3″ maximum swing diameter. Symmetrical design reinforced headstock. High precision spindle with double roller bearing and self-aligning ...

KLM 300LY

Maximum turning diameter of 18.5? and maximum turning length of up to 44.88? Symmetrically designed reinforced head for main and sub. High precision spindle with double roller bearing and self-aligning angular be...

KLM 300SY

Maximum turning diameter of 18.5? and maximum turning length of up to 44.88? Symmetrically designed reinforced head for main and sub. High precision spindle with double roller bearing and self-aligning angular be...

KLR 360

Up to 15″ and 3-jaw chuck with 5.15″ bar capacity. Up to 35.4″ maximum turning diameter and 82″ maximum turning length. High speed / high precision 12 station turret. Precision square, induction-hardened and grou...

CTL 618EVS

• Manufacturer: 6″

Infinitely variable speeds 0-4000 using variable frequency inverter. 1 1/16″ nozzle capacity with 5C type nozzles. Hardened and ground guides for long life. Fully packaged carriage. T-slots on rear of carriage. M...

KLS 1860G

Main shaft motor 7.3 HP, 12 speed. Camlock D1-8, 3.2″ shaft bore. Hardened and ground gears and bed ways. One-piece solid cast base. Jog button, multi-position feed stops. Inch dials and feed screws. Centralized ...

YANG ML-28A CNC LATHE

• Manufacturer: Yang
• Model: ML-28

Year 1998 3,000 RPM Chuck: 10 " | Bar step: 3"

OKUMA CADET CNC LATHE - L1420

• Manufacturer: Okuma
• Model: CADET L1420

Maximum oscillation: 24.4" | Swing on a cross slide: 18.90" | Maximum turning length: 26.06" | Spindle nose: A2-11 | Hole diameter: 4.33" | Spindle speed range: 2800 RPM | Z axis travel: 26.4" | X axis travel: 9...