- Trusted Seller
Cumberland 37H Granulator
- Manufacturer: Cumberland
- Model: 37H
The Cumberland 37H Granulator is a robust piece of recycling equipment, ideal for industrial applications. This used model is powered by a 150 HP motor, ensuring efficient and reliable operation. It includes a ne...
- Trusted Seller
Conair CGW Granulator (2019)
- Manufacturer: Conair
Model: CGW-1424 | Hp: 40 | Rotor style: 5 Blade | Processing capacity: 14" x 24" Feed Throat | Voltage: 460
North Carolina, USA - Trusted Seller
40 HP CUMBERLAND / WHITAKER GRANULATOR, MODEL 3KN – 1620
- Manufacturer: Cumberland
ITEM 1993: 40 HP CUMBERLAND / WHITAKER GRANULATOR, MODEL 3KN – 1620 SERIAL # CA083000-06039 BUILT IN 2007 MOTOR: 230/460 VOLTS 90.5/45.2 AMPS 3 PH 60 HZ 1765 RPM INCLUDES INSTALLED 1” SCREEN OPEN ROTOR DESIGN INC...
- Trusted Seller
L-R SYSTEMS LAS ITS-ROHLINE SERVICE INC. Granulator Grinder – Model 12336
- Manufacturer: L-R SYSTEMS LAS ITS-ROHLINE SERVICE INC
ITEM 1101: GRANULATOR GRINDER L-R SYSTEMS LAS ITS-ROHLINE SERVICE INC. Model Number 12336. Serial Number D16087
$4,120 USDGreensboro, NC - Trusted Seller
Used Aeromatic S-6 Fluid Bed Spray Granulator
- Manufacturer: Aeromatic
Used Aeromatic model S-6 200 KG sanitary 316 stainless steel fluid bed spray granulator. Unit is electro-polished and manually operated. Has (2) product containers equipped with 80 mesh top screen and 325 mesh bo...
Wilmington, NC 
WEIMA Low Speed Grinder – 75 HP
- Manufacturer: Weima
WEIMA Grinder - 2004 Model WLK 13/75 Low Speed, Hopper Style Grinder. Batch style grinder with 75 HP low speed rotor, top feed hopper, self contained hydraulic system with hydraulic ram, and controls. Controls op...
High Point, NC- Trusted Seller
Erweka AR402 Drive Unit with TG2000 and FGS granulator attachments
- Manufacturer: Erweka
ID# 70390 Erweka AR402 Drive Unit with TG2000 and FGS granulator attachments - Used device as shown. Unit powers on and turns. Come with granulators and parts as shown in photos. Parts may be mis...
$1,500 USDGranite Quarry, NC 
2021 AEC FX1012
- Manufacturer: AEC
- Conveyor feed hopper - 3 blade, tangential cutting chamber AL4 blower/cyclone combo - ¼” screen - 1HP blower starter - 3” blower discharge
Gibsonville, NC
2019 Conair CGW-1424
- Manufacturer: Conair
Includes Conveyor! 460V/3/60 48.8 FLA Voltage: 460V | Horsepower: 40 HP | Cutting chamber size: 14" x 24"
Gibsonville, NC
Conair CW-1824
- Manufacturer: Conair
- Model: CW-1824
- 3/8" Screen - Tangential Cutting Chamber - Electric Hopper Tilt
Gibsonville, NC
2015 AEC GP810
- Manufacturer: AEC
- Hand feed hopper - 3 blade rotor - 1/4" screen AL4 Blower and Cyclone - 1 HP Blower - 3" blower discharge
Gibsonville, NC
2018 AEC GP1018
- Manufacturer: AEC
- Model: GP1018
- 3 Blade open rotor - 5/16 Screen - Single Flywheel - Full machine sound enclosure - Airveyor discharge with 4" outlet Offset chamber design (standard design)
Gibsonville, NC
2022 Zerma GSL180/300
- Manufacturer: Zerma
Voltage: 230V or 460V | Horsepower: 5.5hp | Cutting chamber size: 10.5" x 13" | Rotor diameter: 7” | Rotor width: 12” | Number of rotor knives: 30 | Number of stator knives: 2 | Drive capacity: 5.5hp | Screen si...
Gibsonville, NC
Tip: Enter manufacturer, model or keyword
