Used Extruders in New Jersey, USA

Trusted Seller
Carbon Steel SMS Buss TCS-100-16D Kneader Extruder - IPP# 706692
- Manufacturer: Buss
single screw Ko-Kneader system, processing length 16 L/D, carbon steel heated screw, 15mm screw oscillating stroke, screw root diameter 65mm, Theo. pitch in kneading zone (2-spirals) 60mm, pitch in infeed zone (1...
Princeton Junction, NJ
Trusted Seller
KILLION KL-150
- Manufacturer: KILLION
Used 1.5” Killion Single-Screw Extruder Model: KL-150
Hainesport, NJ
Trusted Seller
2007 UMANG PHARMATECH UDRE-65(E)
- Manufacturer: UMANG PHARMATECH
Used Umang Pharmatech Stainless Steel Die Roller Extruder Model: UDRE-65(E) Year: 2007 1.2mm die and ammeter, iris valve with table 6" - manually operated 5 liter 316 stainless steel hopper
Hainesport, NJ
Trusted Seller
MARSHALL & WILLIAMS CO-EX SHEET EXTRUSION LINE
- Manufacturer: Marshall
Used Marshall & Williams Co-Ex Sheet Extrusion Line Consisting of the Following: 2.5" Welex 36/1 L/D with air cooled vented barrel, with 9.145/1 gearbox ratio including manual screen changer, water cooled screw a...
Hainesport, NJ
Trusted Seller
2003 CW BRABENDER INTELLI-TORQUE IT 7150
- Manufacturer: Brabender
Used C.W. Brabender Intelli-Torque IT-7150 Plasticorder Extruder System, Serial #E03-146. Currently equipped with a 24:1 L/D extruder barrel and ¾" (19 mm) screw with strand die, along with a water-cooled feed th...
Hainesport, NJ
Trusted Seller
Thermo Scientific Process 11 Parallel Twin-Screw Extruder
- Manufacturer: Thermo Fisher Scientific
The Thermo Scientific Process 11 is a parallel twin-screw extruder engineered for researchers and formulation scientists who require precision, control, and efficiency in small-scale continuous extrusion. Compact...
North Brunswick Township, NJ
Dynisco LME-120 Laboratory Mixing Extruder 65140
- Manufacturer: Dynisco
Dynisco LME-120 Laboratory Mixing Extruder The Dynisco LME Laboratory Mixing Extruder is a laboratory tool developed to evaluate the processability of a variety of plastics and rubbers from very fine powders to...
$12,500 USD
Get financing
Est. $246/mo
Freehold Township, NJ
Trusted Seller
2001 DAVIS STANDARD PEDESTAL
- Manufacturer: Davis-Standard
- Model: PEDESTAL
Used 1.25" Davis Standard Pedestal Extruder With 36/1 L/D Vented Barrel. New 2001. Has electrically heated air cooled barrel, includes temperature control panel and 5 hp AC motor, 230/460 volt. Previously used as...
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 4.5"
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-12...
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 150INDS-20
- Manufacturer: Davis-Standard
Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 152 rpm screw...
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 1.5"
- Manufacturer: Davis-Standard
- Model: 15
Used 1.5" Davis Standard 28/1 L/D Non-Vented Air Cooled Extruder. New in 1989. Equipped with 6.53/1 gearbox ratio. Gearbox is belt driven through a 15 hp DC motor. Includes temperature control panel with motor dr...
Hainesport, NJ
Trusted Seller
1991 DAVIS STANDARD 4.5"
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M-3315, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-1...
Hainesport, NJ
Trusted Seller
2000 DAVIS STANDARD 5.11"
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
1997 DAVIS STANDARD 5.11"
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
WENGER X-155
- Manufacturer: Wenger
Used Wenger model X-155 extruder. (1) screw feeder with steam injection; (1) screw feeder with motor, no drive; (1) single-shaft pre-conditioner, cut-off knife. No control panel.
Hainesport, NJ