Used Extruders in Illinois, USA

CINCINNATI 63mm TWIN SCREW EXTRUDER 19071

Used Cincinnati conical counter rotating twin screw plastic extruder discharge. Nominal 63 mm diameter (2.5″) screws at the discharge and nominal 115 mm diameter screws at the feed. Barrel is electrically heated ...

BRABENDER 35mm TWIN SCREW EXTRUDER 16813

• Manufacturer: Brabender

One (1) used Brabender Prep Center having a model TSE35/17D-A conical twin screw extrusion head. .Two conical inter meshing screws with a 35mm diameter at the barrel discharge end and a 17:1 L/D ratio. S/N 187502...

CINCINNATI 80mm TWIN SCREW EXTRUDER 18511

• Manufacturer: Cincinnati

Used Cincinnati model CMT80L-APC 80mm conical counter rotating twin screw plastic extruder. S/N 2040985/010. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adapter plate that reduce...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19064

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS 15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N R0385. Shop Order Number 52609. Unit is mounted on a tripod with ...

KILLION 1.5″ 24:1 EXTRUDER SCREW 17747

Killion 1.5″ 24:1 L/D single stage extruder screw6 Available

DELTAPLAST 30MM 5 HP EXTRUDER 18678

One {1) used Deltaplast model D30:24:R 30mm extruder. S/N WO.29:79. Having a 24:1 L/D ratio at a 40.5″ centerline height. Unit has two (2) zone electrically heated, air cooled, non-vented barrel. Hamilton gearbox...

2.5″ 30:1 L/D EXTRUDER 17759

Unknown manufacture 2.5″ extruder, 30:1 L/D air cooled non-vented barrel at a 23.5″ centerline. Powered by a 40 HP 230/460-volt A/C motor with Teco A510 inverter. 4″ x 6″ feed throat. Unitized control panel with ...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19059

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having four (4) zone electrically heated and air-cooled barrel. S/N SO816. Shop Order Number 54242. Unit is mounted on a tripod with cas...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19060

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N P2055. Shop Order Number 51763. Unit is mounted on a tripod with c...

DAVIS STANDARD 1.25″ PEDESTAL EXTRUDER 19062

• Manufacturer: Davis-Standard

One (1) used 1.25” 24:1 L/D Davis Standard model DS125 1.25” pedestal extruder having a three (3) zone electrically heated and air-cooled barrel. S/N S1962. Shop Order Number 55728. Unit is mounted on a tripod wi...

KILLION 1″ 24:1 L/D EXTRUDER 16305

24:1 Killion pedestal extruder. S/N N6598 with a three (3) zone electrically heated air cooled barrel. Gearbox has a reduction ratio of 30:1 and is direct driven by a 3HP 1750/2050 RPM DC motor. Barrel can be rai...

WELEX 2″ 24:1 L/D EXTRUDER 17438

• Manufacturer: Welex

Welex model 200-24/1, 2″ 24:1 L/D extruder with a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 50″ centerline height. Gearbox is a Koellmann Gear and is belt driven by a 20 ...