Used Dryers in New Jersey, USA

Hankinson 801600 Dryer-Air - IPP# 208894

• Manufacturer: Hankinson

Compressed air dryer 200 PSIG maximum With 7.5HP compressor, R22 refrigerant, 30 Lb charge.

Lined Devine Dryer-Shelf - IPP# 213260

• Manufacturer: Devine

vinyl coated shelf dryer. Shelf temperature estimated ~212° F 58" wide x 79" long on 3" spacing. Cast Iron housing with internal coating, Ceilcoat Flakeline 2226F, hinged doors on the front and back of chamber, C...

Dryer-Rotary Vacuum Paddle - IPP# 247266

Dryer-Flaker Drum and Belt - IPP# 703637

• Manufacturer: Gouda

chrome plate drum only For use with Gouda drum flaker

Dryer-Rotary Vacuum Paddle - IPP# 247250

Dryer-Air Carbon Steel - IPP# 245817

• Manufacturer: M.T.A spa

3/50/400 volt, IP22, refrigerant max pressure 22.6 bar LP side, 26 bar HP side,

70 Cu Ft DeDietrich Glass Lined Vacuum Dryer, Model SR3030

• Manufacturer: De Dietrich

70 Cu Ft DeDietrich Glass Lined Vacuum Dryer, Model SR3030 Used 70 cu ft DeDietrich glass lined double cone vacuum dryer, model SR3030, 107 cu ft total capacity, 70 cu ft working capacity, rated 40 PSI and full v...

Dryer-Drum 456 mm (18 in) Stainless Steel 316 - IPP# 704610

• Manufacturer: Simon Dryers

single drum dip feed dryer M/C #4586 Drum cored for steam heating (2-50mm openings) Speed 1 to 6 rpm Drum totally enclosed in 316 stainless steel chamber Motor: non-flameproof motor Drum with monel adjustable sta...

Stainless Steel 304 Dryer-Flash - IPP# 205616

• Manufacturer: Hosokawa Alpine

original product (Artificial Sweetener) design rate Micron Pulverizer/Dryer Micron pulverizer/dryer/classifier is 304SS with (2) 32" x 24" access doors Pulverizing section, is driven by a 50 HP 3/60/460V motor,60...

Dryer-Rotary Vacuum Paddle - IPP# 247251

Dryer-Air Carbon Steel - IPP# 245818

• Manufacturer: Atlas Copco

8.5kW, 3/50/400 volt, air pressure max 13 bar @ 55 degrees C, built in an acoustic cabinet

Dryer- Ribbon & Paddle Stainless Steel - IPP# 95891

• Manufacturer: Bepex

Strong Scott Solidaire dryer Material of construction SS, with CS outer Jacket. 188" thick. Removable rotor. Outboard bearings.

Carbon Steel Dryer-Thermal Disc - IPP# 33050

• Manufacturer: Disco

Torus disc dryer screw 150 psi @ 375 deg F Trough is 64" long x 28" wide x 36" deep Requires 5 HP drive No cover

Littleford Dryer Fkm 2000 E #17382

• Manufacturer: Littleford

Littleford dryer model fkm 2000 e, 71 cubic foot total capacity, 42 cubic foot working capacity, 22 to 52 cf working capacity, 304 stainless steel construction, fully jacketed body rated for 75 psi @ 500 f, three...

Dryer-Flaker Drum and Belt 300 mm (11.8 in) - IPP# 704614

• Manufacturer: Correa

face chrome plated single drum flaker/dryer Drum working pressure 5.5 bar, speed 3 to 21 rpm, cored for steam/hot oil heating