Processing » Agitators, Blenders, Mixers » Mixers » Massachusetts

Building Filters

64

Used Mixers in Massachusetts, USA

  • .65 HP LIGHTNIN CLAMP MOUNT

    .65 HP LIGHTNIN CLAMP MOUNT MIXER 220/440 volt #B-3718

    • Manufacturer: Lightnin

    Lightnin .65 Hp clamp mount mixer 1750 rpm, 208-220/440 v, 3ph motor Need to verify model number High speed model (1) available

    Fall River, MA, USA
  • 1.5 Hp LIGHTNIN VERTICAL DOWN

    1.5 Hp LIGHTNIN VERTICAL DOWN MIXER XP 575 volt

    • Manufacturer: Lightnin

    Stock no B-4018 1.5 Hp LIGHTNIN VERTICAL DOWN MIXER XP Model NLDG150, no. 6915768 1.5 Hp, 1750 rpm, 575 volt, 3 ph XP Gear reduced, 350 rpm rpm shaft speed Flange mount for shaft. Optional angle mount attached (1...

    Fall River, MA, USA
  • .65 Hp LIGHTNIN FLANGE MOUNT

    .65 Hp LIGHTNIN FLANGE MOUNT MIXER with MECHANICAL SEAL #B-4164

    • Manufacturer: Lightnin

    .65 Hp LIGHTNIN FLANGE MOUNT MIXER with MECHANICAL SEAL Model XJDS-65, no. 88/345122 .65 Hp, 1140/960 rpm 208-230/460 v, 60/50 hz, 3 ph XP for hazardous locations 1.25 inch diameter shaft, approx. 288 rpm output ...

    Fall River, MA, USA
  • 10 Hp Jaygo Post Mount

    10 Hp Jaygo Post Mount Disperser Mixer XP #B-4499

      10 Hp Jaygo Post Mount Disperser Mixer XP Manual Speed Control, air over oil lift 10 Hp, 1740 rpm, 230/460 volt, 60 Hz, XP motor 1 7/8 inch diameter x 41 inch long stainless steel shaft Currently with 6.5 inch di...

      Fall River, MA, USA
    • 1/2 Hp CHEMINEER CLAMP MOUNT

      1/2 Hp CHEMINEER CLAMP MOUNT MIXER 1 ph XP #B-4134

      • Manufacturer: Chemineer

      (2) 1/2 Hp CHEMINEER CLAMP MOUNT MIXER model 3JTC-0.50 1/2 Hp, 1750 rpm, 115/230 volt, 3 ph, XP Direct drive. Takes a 1 inch diameter shaft included with a single prop (2) available

      Fall River, MA, USA
    • .33 HP LIGHTNIN VEKTOR CLAMP

      .33 HP LIGHTNIN VEKTOR CLAMP MOUNT MIXER 115/230 v #B-3564

      • Manufacturer: Lightnin

      (2) .33 HP LIGHTNIN VEKTOR CLAMP MOUNT MIXER 115/230 v Mfg. Lightnin Vektor model V5P25 1/3 Hp, 115/230 v, 1 ph gear reduced stainless steel shaft made to order and prop included (2) available

      Fall River, MA, USA
    • 1.5 Hp JWI VERTICAL DOWN

      1.5 Hp JWI VERTICAL DOWN MIXER JLI-150 #B-4252

      • Manufacturer: JWI

      1.5 Hp JWI VERTICAL DOWN MIXER Model JLI-150 1.5 Hp, 1725/1425 rpm input, 208-230/460 v, 3 ph, 60/50 Hz Approximately 300 rpm shaft speed 4-bolt mount, 12 inch square 4.5 inch diameter, 4-bolt flange for shaft mo...

      Fall River, MA, USA
    • 1/2 Hp LIGHTNIN MIXER ND2

      1/2 Hp LIGHTNIN MIXER ND2 GEAR REDUCED #B-4419

      • Manufacturer: Lightnin

      1/2 Hp LIGHTNIN MIXER GEAR REDUCED Model ND2, serial no. 735911 1/2 Hp, 1725 rpm, 230/460 v, 3 ph, 60 hz Gear reduced, 350 rpm shaft speed Currently setup with a 4-bolt mount It can also be clamp mounted. We have...

      Fall River, MA, USA
    • 1998 25 liter Stainless Steel

      1998 25 liter Stainless Steel Jaygo Jacketed Double Blade Sigma Mixer #B-4529

      • Manufacturer: Sigma

      25 liter Stainless Steel Jaygo Jacketed Double Blade Sigma Mixer Jaygo model AM-25-SF, serial no. 2648, Made by Lleal Process S.A. of Spain, machine AMASADORA Manufacturer no. 14383-1, serial no. 3506 Powered by...

      Fall River, MA, USA
    • 1/4 Hp LIGHTNIN VEKTOR CLAMP

      1/4 Hp LIGHTNIN VEKTOR CLAMP MOUNT MIXER high speed #B-3563

      • Manufacturer: Lightnin

      1/4 Hp LIGHTNIN VEKTOR CLAMP MOUNT MIXER high speed Mfg. Lightnin Vektor model V1P18N 1/4 Hp, 1725 rpm, 230/460 v, 3ph High speed stainless steel shaft made to order and prop included Several similar mixers avail...

      Fall River, MA, USA
    • 1/4 Hp Lightnin 4 inch

      1/4 Hp Lightnin 4 inch Tri-clamp Mount Mixer 3 PH #B-4320

      • Manufacturer: Lightnin

      1/4 Hp Lightnin 4 inch Tri-clamp Mount Mixer Serial no. RO337697801, model EV1L25 4 inch tri-clamp mount 1/4 Hp, 1750 rpm, 230/460v, 3ph, 1.5/.55 amps, 2700 rpm max. (1) available

      Fall River, MA, USA
    • 7.5 Hp Myers Disperser Mixer

      7.5 Hp Myers Disperser Mixer 775A-7.5-1446 XP #B-4500

      • Manufacturer: Myers

      7.5 Hp Myers Post Mount Disperser Mixer model 775A-7.5-1446 Date 5/85. Manual Speed Control, air over oil lift 7.5 Hp, 1170 rpm, 230/460 volt, 60 Hz, XP motor, 254T TE frame 1.75 inch diameter x 40 inch long sta...

      Fall River, MA, USA
    • 1.17 Hp Lightnin XJC Vertical

      1.17 Hp Lightnin XJC Vertical Down Flange Mount Mixer 3 ph #B-4528

      • Manufacturer: Lightnin

      1.17 Hp Lightnin Vertical Down Flange Mount Mixer Model XJC-65, no. R9971823700501 1.17 Hp, 1725 rpm, 208-230/460 v, 3ph Flange mount with packing gland 4-bolt shaft mount. Direct high speed (1) available

      Fall River, MA, USA
    • 30 Hp Sanitary Stainless Steel

      30 Hp Sanitary Stainless Steel Inline Mixer 2 x 1.5 inch #B-4510

        30 Hp Sanitary Stainless Steel Inline Mixer 2 x 1.5 inch Tri-clamp 2 inch top and 1.5 inch side fittings 30 Hp, 3450 rpm, 230/460v, 3ph, 60hz Mechanical seal Has Chesterton Seal Liquid Unit rated for 350 psi @ 35...

        Fall River, MA, USA
      • 1/4 Hp Right Angle Mixer

        1/4 Hp Right Angle Mixer 10:1 ratio Variable Speed #B-4463

        • Manufacturer: Brother of Japan

        1/4 Hp Right Angle Mixer 10:1 ratio Variable Speed Mfg. by Brother of Japan for Hyclone. Originally with 50 liter single use reactor, no. CC0605-3, p/n SV50171-01, 9/06 Only parts of the reactor are still with it...

        Fall River, MA, USA
      12345

      Overview

      Mixers are vital machines used in various industries, including construction, food production, and pharmaceuticals, to blend, mix, or combine different materials. These machines come in different types and sizes, from small countertop models to large industrial units, designed to handle specific mixing tasks efficiently and effectively.

      FAQ

      What factors should I consider when purchasing a mixer?

      Consider the type of materials you will be mixing, the required capacity, the power source, and any specific features like speed settings or timer functions. Check for durability and ease of maintenance as well.

      How do I ensure my mixer is shipped safely?

      Use a reliable shipping service experienced in handling industrial machinery. Ensure the mixer is properly secured and protected with cushioning materials to prevent damage during transit.

      What maintenance does a mixer require?

      Regular maintenance includes cleaning the mixing components after each use, checking and tightening any loose parts, and lubricating moving parts as needed. Follow the manufacturer's guidelines for more detailed maintenance schedules.