Used Processing in Wallonia, Belgium

Simple floor type grinder RICHARDS Ø 760mm

• used

1998 Dust collector LÜHR, ± 4000 m³/h

• used

• Manufacturer: Lühr

With 60 filter hoses (horizontal) With pneumatic filter cleaning With exhaust (mounted on the side) With new dust collector Without control board

Screw mixer HMS, 1 arm, ± 5 t/h

• used

Height: inlet: 1760mm With pneumatic slide on the inlet With 2 pumps With emergency stop With control board

1989 Semi-automatic moulding plant HWS-HSP-2

• used

• Manufacturer: HWS-Sinto

With sand hopper and extraction belt With turning table With roll-over With two-hand control board SIEMENS S5 With mould assembly station With transfer trolley With push-out station With vibrating separation channel

1990 Tilting crucible furnace HINDENLANG, aluminium, gaz heated, 800 kg

• used

• Manufacturer: Hindenlang

Tiltable furnace HINDENLANG, melting and warm holding Electric control board With stage and extractor hood With exhaust gas stack

Vibro-loading conveyor THOMAS LOCKER

• used

• Manufacturer: Thomas

External dimensions: Lenght: 3550mm; Hight: 2900mm (height floor-conveyor: 1630mm) Usesul dimensions: Lenght: 3100mm; on the top: 2250mm ; on the bottom 600mm; height: 700mm 2,2KW; 380V; 3PS up to air cushion vib...

Mixer for barrels for suspension coating )

• used

• Manufacturer: Lafert

Weight: ± 50 kg | Dimensions: height 1750mm | Motor: 2,2 KW, 230/400 V, 940 rpm | Immersion depth: 1040mm | Cover: Ø 530mm

Monorail with 2 bins / sand distribution system

• used

KBK monorail with 3 curves, 90 ° 1 bins with trailing cables and pneumatic hose Electric drive for DEMAG KBK 2 Bin opening by pneumatic flap with compressed air cylinder DEMAG KBK rails 41m, straight This plant w...

Lance for trmperature measurment Heraus Electronite with electric cable

• used

• Manufacturer: Heraus Electronite

With cable Ø fron section 14mm wall display for extra charge

Lance for trmperature measurment Heraus Electronite with electric cable

• used

• Manufacturer: Heraus Electronite

With cable wall display for extra charge Weight: ±15kg | Lenght: 1300+650mm

Lance for temperature measurment with electric cable

• used

With cable wall display for extra charge Weight: ±15kg | Lenght: 1500+1630mm

Roller transfer carriage 1700 × 1000 mm

• used

Dimensions: Lenght: 1900mm; Width: 1800mm; Hight: 820mm roller width 1000mm between axles 150mm

1997 Shake-out conveyor FOUNDRY AUTOMATION, 4000mm x 750mm

• used

External dimensions: length 5050mm, width 1100mm, height 2400mm 2 motors On 12 springs (13/essay) On subframe

1992 Dust collector HANDTE, 12 000 m³/h

• used

• Manufacturer: Handte

Direct drive Pneumatic cleaning With 2 dust bins With 48 flat filter hoses, 2400mm x 480 mm

flexion test devicer GF /PFA with drive

• used

• Manufacturer: GF

Dimensions: Length: 660mm; Width: 360mm; Height: 250mm With electric drive and tools for flexion testing