Used Sollich Processing

Sollich Auger/Mixing Screw

• Manufacturer: Sollich

Sollich Auger/Mixing Screw - 12" diameter x 44" long auger - Stainless Steel jacketed trough - 2 HP, 3 phase, 60 cycle, 277/460 volt motor

Sollich 42" Inclusion Feeder

• Manufacturer: Sollich

Sollich 42" Inclusion Feeder - Stainless Steel Hopper - 42.5" wide belt width (35.5" between the nylon guides) - ½ HP, 3 phase, 60 cycle, 480 volt motor

2012 Sollich Germany Hammer mill sollich #904952

• Manufacturer: Sollich

Sollich Hammer Mill Type Massezufuhrs system 208 / 480 volts 60 hz Dimensions: 62 inch high x 100 inch length x 54 inch width Conveyor : 30 inch width x 60 inch length Made in Germany

SOLLICH 1 Cooling tunnel

• Manufacturer: Sollich

Type KS280

Water recooler SOLLICH - Type FKL-S-36, year of manufacture 1993.

• Manufacturer: Sollich

Decrystallizer/heat exchanger SOLLICH - Type , with approx. 1,000 kg hourly output.

• Manufacturer: Sollich

Decrystallizer/heat exchanger SOLLICH - Type , with approx. 1,000 kg hourly output.

• Manufacturer: Sollich

wire belt table SOLLICH - type TRT-280, with approx. 280 mm working width.

• Manufacturer: Sollich

Belt infeed table SOLLICH - Type 2.2 m transport table 520, built in 2017.

• Manufacturer: Sollich

The table was used as an infeed table on a TC-420 enrobing machine. However, the belt table has a working width of approx. 520 mm and a length of 2.2 meters.

Second hand Cooling tunnel SOLLICH - type KS-620 with belt width 620 mm.

• Manufacturer: Sollich

The tunnel is provided with contact cooling along the bottom and radiation cooling above the product by means of cold water. The lower part of the cooling tunnel has been fed with external cooling water and is no...

Pre-cooling channel SOLLICH - Type KK-280 with approx. 8.7 meters length.

• Manufacturer: Sollich

90° curve table SOLLICH - Type GT-420-90°R with approx. 420 mm working width.

• Manufacturer: Sollich

extruder molding line HOPPE/SOLLICH - Type KBF-KK-GS with approx. 280 mm working width:

• Manufacturer: Sollich

The system for producing product strands that can be cut to length using a guillotine. G13085 used extruder Hoppe type KBF-280 with feed hopper, feed rollers and mouthpiece, for forming 5 mass strands. These are ...