Used Surface Treatment / Cleaning

SIMCO TG-3 Ionizing Air Gun USED

• Manufacturer: Simco

Input: 100 VAC, 50/60 Hz, 0.36/0.34 Amp Output: 5.35 kVAC SC: 5mA Max 7 Bar Max Pressure 40°C Max Temperature Removed from: Meiki Injection Molding Machine Model: MDMI VT-1000IID Control Expedited shippi...

METAL FABRICATOR 3 Zone Hot Runner USED

• Manufacturer: METAL FABRICATOR

3 Zone with (3) Used XIN LEI Hot Runner Cards Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purc...

WATLOW HEAT ELEMENT U6-29-123-2 Used

• Manufacturer: WATLOW

240V 9KW 3PHY Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This piece is located at...

TEMPCO TPN01172 Heat Element USED

• Manufacturer: TEMPCO

M 19 11 12 kW 460 Volt 3 Phase Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This p...

TEMPCO TNP01173 HEAT ELEMENT USED

• Manufacturer: TEMPCO

2.5 kW 240 Volt 3 Phase D 17 24 Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This ...

WATLOW HEAT ELEMENT U6-29-123-2 Used

• Manufacturer: WATLOW

240V 9KW 3PHY Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This piece is located at...

Plasmatherm SLR-720 RIE System

• Manufacturer: Plasma-Therm
• Model: SLR-720

PLASMATHERM SLR-720 RIE consisting of:- Model: SLR-720- Single chamber with load lock- Currently configured for 4" wafers - Can process up to 8"/200mm wafers (with proper tooling, available at additional cost) - ...

Oxford Plasmalab 100 ICP System

• Manufacturer: Oxford
• Model: PlasmaLab 100

OXFORD PLASMALAB 100 ICP ETCHER consisting of:- Model: Plasmalab 100 ICP- Inductive Coupled Plasma Source (ICP380)- Max wafer size: 8"/200m diameter (8" platen)- X-20 PLC Controller- New Windows 10 PC- Cryo Table...

Tepla 600 Semi-Automatic Plasma Asher

• Manufacturer: TePla
• Model: 600

TEPLA 600 PLASMA ASHER consisting of: - Model: 600 SemiAuto- Semi-Automatic RF Plasma System - Can process up to 150mm wafers- Used for photoresist stripping and surface cleaning, as well as etching silicon and i...

Semitool Sirius System

• Manufacturer: Semitool
• Model: Sirius

SEMITOOL SIRIUS HYDROZONE SYSTEM consisting of:- Model: Sirius HydrOzone- Wafer Size: 150mm & 200mm wafer capable- Process: DI water/ozone- Rinse: DI water with ammonium hydroxide- Dry: N2- Spray processing chamb...

Semitool Spray Solvent Tool (SST-421)

• Manufacturer: Semitool
• Model: SST-421

SEMITOOL SPRAY SOLVENT TOOL (SST) consisting of: - Model: 421 - Automated Spray Solvent Tool (SST)- Process Applications: Polymer Removal, Resist Stripping, Wafer Cleaning, Metal Lift-Off- Batch Solvent Process...

Semitool Spray Solvent Tool (SST-421)

• Manufacturer: Semitool
• Model: SST-421

Semitool Spray Solvent Tool (SST-421) consisting of:- Model: SST-421- Semi-Automated Spray Solvent Tool (SST)- Batch Solvent Processor for Wafer Cleaning- Max Substrate Size of 8”/200mm

MicroTech Solvent Wet Bench

MicroTech Solvent Wet Bench consisting of:- 2 IPA Tanks- 2 Process Tanks - Megasonic Tank w/ Recirculation - Ultrasonic Tank w/ Recirculation- Capable of Processing 6 & 8" Wafers- Robotic Handling- Vintage: Appro...

Plasmatherm Odyssey Asher

• Manufacturer: Plasma-Therm

PLASMATHERM ODYSSEY HDRF ASHER consisting of:- Model: Odyssey HDRF- Configured for 150mm wafers- 2 Chambers- Vintage: Approximately 2019- Used Minimally for R&D & Light ProductionConfigured with Gases:- O2- O2- C...

Oxford PlasmaPro NGP1000 ICP 380

• Manufacturer: Oxford
• Model: PlasmaPro NGP1000

OXFORD PLASMAPRO NGP1000 ICP 380 ETCHER consisting of: - Model: Oxford PlasmaPro NGP1000 ICP380 ETCHER- Load Locked Chamber - 490mm Diameter Aluminum Lower Electrode- Capable of running up 450mm wafers- System P...