Used Agitators, Blenders, Mixers in Hiroshima, Japan

2001 SMTHE HFM-5 · HFM-10
- Manufacturer: SMT
HFM-5 Motor: 1.5kw Throughput: 3-5L/batch Rotation speed: 8000rpm(MAX) HFM-10 Motor: 2.2kw Processing volume: 5-10L/batch Rotation speed: 15000rpm(MAX) φ80 6 blades, sealed jacketed vessel
Hiroshima, Japan
1999 Araki Iron Works RG - 100
- Manufacturer: Araki Ironworks
Main unit: Explosion-proof specification Starting board: Non-explosion-proof area Remarks Drawings only available
Hiroshima, Japan
3500L Cylindrical vertical type
Agitator: 5.5kw (Cyclo Decelerator) Jacket：SUS304 Drawing available
Hiroshima, Japan
1990 Iwai Machinery Industry Cylindrical vertical type
- Manufacturer: 岩井機械工業
Type 2 pressure vessel Jacketed and agitated (0.4 kW) Shower ball Bottomless
Hiroshima, Japan
SUS tank with coil
Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)
Hiroshima, Japan
3000L Vertical cylindrical type
Agitating blade: Side scraping specification Power: 2.2kw | Material: SUS | Quantity saved: 7 units
Hiroshima, Japan
Izumi Food Machinery Vertical Cylindrical Type
- Manufacturer: イズミフードマシナリー
Jacket and agitator included Shower ball included Power: 1.5kw | Material: Wetted part SUS | Quantity saved: One | Size: Diameter: Approximately 2300φ Overall height: Approximately 3600H
Hiroshima, Japan
Hitachi, Ltd. Cylindrical vertical type
- Manufacturer: Hitachi
Wetted part material: SUS Flat top and bottom SUS spiral cored Jacket: Coil (transmission surface 5m2) Agitator: 1.5kw Shape: Upper and lower flat
Hiroshima, Japan
2002 Iwai Machinery Industry Cylindrical vertical type
- Manufacturer: 岩井機械工業
Jacketed and agitated (0.4kW) Shower ball Bottomless Type 2 pressure vessel
Hiroshima, Japan
Shimazaki Works Cylindrical Vertical
- Manufacturer: Shimazaki Seisakusho
For medium viscosity (7000CP) 11kw cheaper 3-stage blades, filling volume: 1200L, Jacket: Yes Agitator: 11kw, low cost Shape: Bottom dish mirror Previous experience: Used in adhesive manufacturing process
Hiroshima, Japan
1982 Hitachi Ltd. Cylindrical vertical type
- Manufacturer: Hitachi
Conveyor surface: 9.8 m2 Pressure: 6 kg/cm2 Jacket: Coil Agitator: 1.5kw Shape:Flat top and bottom
Hiroshima, Japan
350 L Cylinder vertical type
Jacket (for hot and cold water, not steam) Homo mixer (3.7 kw)
Hiroshima, Japan
1984 Iwai machine cylinder vertical type
- Manufacturer: Iwai Machinery
Jacket / stirrer (2.2 kW, 3 propeller blades) ※ Satake Multi Mixer (360 rpm) Closed type, with shower ball / manhole
Hiroshima, Japan
Ashizawa PLM-300
- Manufacturer: reed bed
The vacuum specification was changed to a pressurized specification. Tank capacity 320L. Weight 4.6 tons. Bayer reduction gear drive. Can be converted to 200V by rewinding or replacing the motor.
Hiroshima, Japan
10,000L (10m3) Cylindrical vertical type
Bottomless, with legs. Reduction ratio 1/29. Interior has been simply cleaned.
Hiroshima, Japan