Used Processing in Opole, Poland

Wentylatory do piecy, nadmuchowe i odciągowe

Fans with various parameters, functional.

Urbas 4 MW furnace

Piec o mocy grzewczej 4 MW Piece na biomasę, korę, zrębkę, trocinę. Wilgotność materiału do 60 % Piec dostępny od lipca – sierpnia 2025

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Screw length 3 m Screw diameter 120 mm Screw drive motor 0.25 kW, 1340 rpm Cell motor 0.37/0.42 kW, 1390/1665 rpm

Expansion vessel for furnace, buffer, capacity 1000 l

Pojemność 1000 l Ciśnienie min/max 0/4 bar Temperatura do 100 stopni Rok 2010 – wysokość 220 cm -średnica 90 cm

A scraper, a redler for sawdust, chips, etc. 58

• Manufacturer: ats maszyny drzewne asoltys kbanas sc

Length: 7.50 m Feeder length: 28 cm Channel dimensions: 29 x 18 cm

Conveyor belt, conveyor belt TA 253

Length 22 m Tape width 30 cm New tape Total width 40 cm Motor 1.7 kW

Conveyor belt, conveyor belt TA 260

Długość część pozioma 3,50 m, skos 2,50 m Szerokość taśmy 60 cm Wysokość wysypu 180 cm

Insulated chimney made of acid-resistant stainless steel, 7.50 m ��� BOOKING

RESERVATION Length 7.50 m Outer diameter 370 mm Inner diameter 250 mm RESERVATION

5-row ascending cross feeder PP 227

Length (transport route) 4.80 m (horizontal part 2.50 m, slope 2.30 m) Width 4.00 m Distance between guides 150 x 90 x 90 x 60 cm Feeder height approx. 2.00 mm Motor 2 HP

BINDER 200 KW biomass furnace

Furnace with a heating capacity of 200 kW TYPE RRK 150 Furnace for biomass, bark, wood chips, and sawdust. Furnace with a carousel fuel feeder. A video demonstrating the carousel feeder is included.

Plate chain, transport chain

Pitch 200 mm (from pin axis to pin axis) Plate thickness 10 mm Width between inner plates 45 mm Width between outer plates 65 mm Plate height 60 mm We have approximately 80 m of stock

Buffers, hot water tanks, capacity 18,000 l

Buffer tank with a capacity of 18,000 liters Height: 458 cm Wall thickness: 6 mm Diameter without insulation: 2500 mm Diameter with insulation: 2900 mm Two hot water buffer tanks, leak-proof, recently dismantled ...

Emergency cooler for a 3.5 MW furnace

A total of 8 fans, with high-performance coolers underneath. Two segments, one segment cools 1500 kW.

Atlas Copco GA 55 13 compressor

• Manufacturer: Atlas-Copco
• Model: GA 55

TYPE GA 55 Pressure 10 bar Engine 55 kW Year 2000

Taśmy transportowe , taśmociągi, napędzane TA 257, TA 258

Length 3.00 m Belt width 30 cm, belt with cleats Total width 45 cm Height 35 cm