Used Processing in Wallonia, Belgium

Shaking device for ladles and furnaces, Ø 600 mm to 900 mm

Small grantry crane to put on top of ladle or furnace equipped with electric winch, max. capacity 700 kg to move inside of the lining former on support plate with 3 pneumatic hammers

Overband magnet STEINERT, 2,7 KW 900 mm x 750 mm

• Manufacturer: Steinert

With transformer / rectifier and switch Weight: 2000 kg | Dimensions: length 2250 mm, width 1150 mm, height 900 mm | Motor: 2,2 kW, 220/380 V, make VDE, 1430 rpm | Magnet surface: 900 mm x 750 mm | Belt width: 80...

Moulding boxes, 620 mm x 600 mm x 460 mm

With trunions With bushings 4 clamping pins Weight: 110 kg/pc

Hammer mill, 15 kW, with perforated bottom

Motor: 15 kW, 220/380 V, make ABB, type MBUL 180 L4, 1445 rpm Drive over 6 V-belts 4 hammer ranges each with 8 hammers Width 310mm, Ø ± 400mm With interchargeable qualibration sieve bottom With small exhaust for ...

2003 Dust filter AEROB, 2000 m³/h to 2500 m³/h, stainless steel

• Manufacturer: AEROB / BG Filtration
• Noise level: 80 decibel

With extraction socket, Ø 140mm With stainless steel filter housing Pneumatic filter cleaning Dust bucket Connection tubes and bows With silencer With exhaust on the floor next to the filter With CE sign With sta...

Induction melting furnace INDUCTOTHERM, 250 kg

• Manufacturer: Inductotherm

With 2 furnaces for alternativ working With transformer With hydraulic With cooling tower With water pump With control board

1980 Moulding machine KÜNKEL WAGNER, APM.f1

• Manufacturer: Künkel Wagner

Moulding machine without foundation With pneumatic drived head pivoting With pneumatic table vibrator

Conical perforated stainless sheets for fluid beds

Only on request Stainlees sheets Conidur with double conical perforation towards the length serve for dedusting of silica sand, e.g. for inserting air aerator and moving the sand forward These sheets are only mad...

Simple floor type grinder RICHARDS Ø 760mm

1998 Dust collector LÜHR, ± 4000 m³/h

• Manufacturer: Lühr

With 60 filter hoses (horizontal) With pneumatic filter cleaning With exhaust (mounted on the side) With new dust collector Without control board

Screw mixer HMS, 1 arm, ± 5 t/h

Height: inlet: 1760mm With pneumatic slide on the inlet With 2 pumps With emergency stop With control board

1989 Semi-automatic moulding plant HWS-HSP-2

• Manufacturer: HWS-Sinto

With sand hopper and extraction belt With turning table With roll-over With two-hand control board SIEMENS S5 With mould assembly station With transfer trolley With push-out station With vibrating separation channel

1990 Tilting crucible furnace HINDENLANG, aluminium, gaz heated, 800 kg

• Manufacturer: Hindenlang

Tiltable furnace HINDENLANG, melting and warm holding Electric control board With stage and extractor hood With exhaust gas stack

Vibro-loading conveyor THOMAS LOCKER

• Manufacturer: Thomas

External dimensions: Lenght: 3550mm; Hight: 2900mm (height floor-conveyor: 1630mm) Usesul dimensions: Lenght: 3100mm; on the top: 2250mm ; on the bottom 600mm; height: 700mm 2,2KW; 380V; 3PS up to air cushion vib...

Mixer for barrels for suspension coating )

• Manufacturer: Lafert

Weight: ± 50 kg | Dimensions: height 1750mm | Motor: 2,2 KW, 230/400 V, 940 rpm | Immersion depth: 1040mm | Cover: Ø 530mm