Used processing in Wallonia, Belgium

Profile- and formbandsandpapering machine HUGO SCHNEIDER

• Manufacturer: Schneider

Way between the columns 600mm, table pivoting With aspiration and accessories With one carton rechange grinding belts , width 30 mm.,lenght +- 1480 mm.

Vertical band sandpapering machine ZIMMERMANN

• Manufacturer: Zimmermann

Table 500 mm x 500mm, tiltable, graduated Outside dimensions: 500 x 1000, h. 1700 mm | Motor: 1,3 / 1,7 KW, 380 V, 1400/800 rpm

Ladle heater, gas propane, SARGI

2 kW, 3 x 380 V With ventilator ±400 m³/h, 1 kW, 2900 rpm, 220/380 V Hi is e side ladle heater /pannel 1000x1000 mm. with control board and timer

Dust conveyor 150 l, KLEIN, type A15O

Year of construction: 1968, serial number: 058 For 100°C - 8 atmospheres With 2 sondes - is complete except one sonde SP overtaken = with switch cabinet Dust feeder

Frequency converter LOHER, 10 KVA 200 V. 300 HZ.

• Manufacturer: Loher

Motor: type: SN60M-2G, 8,5 kW, 2915 rpm, exit 220/380 V, 31/18 A Converter type DCG1610, 10 KVA, 200 V, 300 Hz Exit 220/380 V, 24/14,without control box

Transport screw 1800 x 150mm

• Manufacturer: Webac

Useful length 1800mm, Ø 150mm 11 kW, 220/380 V, 50 Hz, 1390 rpm, direct drive Transport screw Ø 150mm Flange between Ø 200mm

Screw for mixer alone (slow)

Motor ± 4 hp, 1500 rpm, 220/380 V, rotations of the screw 70 rpm

Rubberbeltconveyor EA 6700 x 500mm

Transmission by belts, in good condition Outside dimensions: 7000 x 800mm | Useful dimensions: EA 6700mm x 500mm

Rubberbeltconveyor 4850mm x 780mm

Drummotor DRUMO, type DB15/142, 3 Kw, 1500 rpm, 220/380 V Bandspeed 1 m/s, with Inox funnel

Wood table sawing machine, Ø 600mm, 1470 rpm

Bore 40 mm Outside dimensions: 1400 x 900 mm | Motor: 8,8 kW, 12 hp, 1450 rpm, 380/660 V

Casting ladle, ± 2,3 t, COLLIN

With with oilbath gearbox With ring of lifting Outside dimensions: 1900mm x 1100mm, h. 2100mm | Useful dimensions: Ø 1000mm, H (without concrete) 1050mm

Double floor type grinder, Ø 600 mm, non-constant speed, 45 m/s

Motor ASYNCHRONE, type: 25D, 3,7 kW, 5 hp, serial number: 244783 Stone width 50 mm, Ø 600 mm

1990 Returner of frame motorized by cable hoist DEMAG max.1050 kg

• Manufacturer: Demag

Brand: STEINFURTER EISENWERK, serial number: 25224 Year of construction: 1991, weight : 507 kg Motor DEMAG, type : PK10-NF, serial number: 5121593, 1,5/0,35 kW, 220/380 V, year: 1990 Charge max. 1050kg with hoist...

Sand aerator COLLIN

Carried by 2 belts trapezoid, t projector drum with 2 bars Suitable to be applicated under the grinder or in a little sandblast manufacture Sand is spitted in the pin. In good condition

Chain conveyor 4450 x 800mm

Useful length 4450mm Capacity DEMAG With support plate for parts Between axis 4450mm Small plates fastened on the 2 chains, 410mm x 150mm Very good condition