Used Sin Marca Lathes in USA

UNBRANDED Tool holders Tool holders

• Manufacturer: Sin Marca

2x H6 Servo Turret Tool Holders Works with Kingston CL38 CL58 Lathes Lot of 2 tool holders that work with the rear turret on most common H6 servo Turrets Kingston Lathes JC

UNBRANDED BMT45 BMT45

• Manufacturer: Sin Marca

Half Index BMT 45 OD Turning Tool Holds 3/4″ Turning Tools Works with Doosan Lynx Lathes w/ half index option.

UNBRANDED LATHE CHUCK ADAPTER BACK PLATE 10" CHUCK

“HAS SOME SURFACE RUST” UNBRANDED LATHE CHUCK ADAPTER BACK PLATE 10" CHUCK FOR ADJUSTABLE SELF-CENTERING CHUCKS SPINDLE NOSE TYPE SERIES D D1-6 MOUNT 10" OD THROUGH HOLE DIAMETER: 3" MATERIAL: STEEL INSIDE DIAMET...

UNBRANDED LATHE CHUCK ADAPTER BACK PLATE 10" CHUCK

“HAS SOME SURFACE RUST” UNBRANDED LATHE CHUCK ADAPTER BACK PLATE 10" CHUCK FOR ADJUSTABLE SELF-CENTERING CHUCKS SPINDLE NOSE TYPE SERIES D D1-6 MOUNT 10" OD THROUGH HOLE DIAMETER: 3" MATERIAL: STEEL INSIDE DIAMET...

UNBRANDED LATHE HEAD CENTER 8" DIAMETER 1/4" POINT

• Manufacturer: Sin Marca

“SURFACE RUST” UNBRANDED LATHE HEAD CENTER 8" DIAMETER 1/4" POINT UNBRANDED LATHE HEAD CENTER 8" DIAMETER 1/4" POINTSHAFT LENGTH: 2"SHAFT DIA: 4-5/8"OAL: 9"9x8x8PLEASE READ BEFORE BIDDING, MAKING AN OFFER, OR PUR...

UNBRANDED MANUAL LATHE CHUCK 10" DIAMETER 4 JAWS REVERSIBLE JAWS CAST IRON

• Manufacturer: Sin Marca

“OLD STOCK , MAY HAVE SHELF-WEAR.” UNBRANDED MANUAL LATHE CHUCK NO. OF JAWS - 4 CHUCK DIA. - 10" MIN. JAW CAPACITY - 0.2000" THROUGH-HOLE DIA. - 2.9900" MAX. RPM - 1800RPM REVERSIBLE JAWS BODY MATERIAL - CAST IRO...

UNBRANDED 4 SLOT WORK HOLDING LATHE FACE PLATE 7"x2"

“MAY HAVE SHELF WARE” UNBRANDED 4 SLOT WORK HOLDING LATHE FACE PLATE 0-350° INCREMENT L 7" W 2" APPROXIMATLEY 15LBS DT-3681-SK499-1-BH

UNBRANDED LATHE FACE PLATE 14" OD BORE 2-1/4" STEEL MATERIAL

UNBRANDED LATHE FACE PLATE OD 14" W 1-1/2" BORE 2-1/4" STEEL MATERIAL WEIGHT: 32 LBS OAD: 14" X 14" X 2" SS-998-E2-2(1)ABI

UNBRANDED LATHE FACE PLATE 12" OD " BORE 2-1/4" STEEL MATERIAL

UNBRANDED LATHE FACE PLATE OD 12" W 1-1/8" BORE 2-1/4" STEEL MATERIAL WEIGHT: 18 LBS OAD: 12" X 12" X 2" SS-997-E2-2(1)ABI

UNBRANDED LATHE FACE PLATE 16" OD " BORE 2-1/2" 2" WIDTH STEEL MATERIAL

“MAY HAVE SHELF WARE” UNBRANDED LATHE FACE PLATE OD 16" W 2" BORE 2-1/2" STEEL MATERIAL WEIGHT: 64 LBS OAD: 16" X 16" X 2" BOX: 25" X 25" X 10" AE-#3984-SKID 135(1)BH

UNBRANDED LATHE TURRET BORING TOOL HOLDER BLOCK 2" DIA. 4-1/4" LENGTH

“MAY HAVE SHELF WEAR” LATHE TABLE TOOL HOLDER W/CUSTOM ATTATCHED TOOL HOLDER UNKNOWN BRANDTOOL HOLDER W/CUSTOM TOOL HOLDER ATTATCHMENT(POSSIBLY MOUNTED TO A TABLE)1/2" MOUNTING HOLES (4)VERTICAL DISTANCE 2-1/2"HO...

UNBRANDED 4 JAW 19 1/2" LATHE CHUCK

• Manufacturer: Sin Marca

UNBRANDED 4 JAW LATHE CHUCK 19-1/2" O.D. 6-3/8" I.D. 4 3/4" WIDTH 4 JAWS 6-3/4" LONG 2-1/8" WIDTH BOLT DIAMETER: 3/4" WEIGHT: 302 LBS HJL/WM/1676/SDR D H-3 (1) AS

L1 LATHE FACE PLATE, 14" OD, 4" BORE, 6" HUB OD STEEL

L1 LATHE FACE PLATE OD 14" BORE 4" HUB OD 6" STEEL MATERIAL WEIGHT: 30 LBS OAD: 14" X 5" X 5" SS-1383-E2-1(1)ABI

UNBRANDED V BLOCK WITH 2 CENTER FINDERS (LOT OF 2)

“MAY HAVE SHELF WEAR” UNBRANDED V BLOCK WITH CLAMP AND CENTER BLOCK DIM: 2-3/4" X 4-1/2" X 3-1/4" CENTER DIM: 5-1/8" X 29/64" HARDENED STEEL OAD: 5-1/4" X 6-1/2" X 2-1/4" WEIGHT: 10 LBS HM/#653/WB AO3/(1)DP