- Trusted Seller
LCI Extruder, model MG-55
used
- Manufacturer: LCI Fuji Paudal
LCI Extruder, model MG-55 Used LCI Extruder, model MG-55, stainless steel construction, with controller, 1 hp motor, 230 volt, serial# 3511953, built 2006.
Cleveland, OH - Trusted Seller
3.5" Davis Standard Cold Feed Rubber Extruder
used
- Manufacturer: Davis-Standard
3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...
Cleveland, OH - Trusted Seller
3.5" Davis Standard Cold Feed Rubber Extruder
used
- Manufacturer: Davis-Standard
3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...
Cleveland, OH - Trusted Seller
0.375" Randcastle Microtruder Extruder, Model RCP-0375
used
- Manufacturer: Randcastle
0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used Randcastle RCP-0375 3/8" Single Screw ExtruderUsed .375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electr...
Cleveland, OH - Trusted Seller
0.25" Brabender Extruder, 48:1 L/D
used
- Manufacturer: Brabender
0.25" Brabender Extruder, 48:1 L/D Used 0.25" Brabender extruder, electrically heated, air cooled barrel, 48:1 L/D, driven by 2 hp, 180 volt motor with VFD, controls on frame.
Cleveland, OH - Trusted Seller
10" Ventura Hydraulic Fab Horizontal Ram Extruder
used
- Manufacturer: Ventura Hydraulic Fabricators
10" Ventura Hydraulic Fab Horizontal Ram Extruder Used 10" Ventura Hydraulic Fabricators horizontal ram extruder, approximately 8" x 12" feed opening with screen changer, hydraulically operated less pump.
Cleveland, OH - Trusted Seller
2.5" Davis Standard Extruder, 24:1, 50 HP
used
- Manufacturer: Davis-Standard
2.5" Davis Standard Extruder, 24:1, 50 HP Used 2.5" Davis Standard extruder, model 25IN25H, 24:1 L/D, electrically heated, air cooled, jacketed feed section, top vented and plugged barrel, 17.2:1 gearbox ratio, 1...
Cleveland, OH - Trusted Seller
Filabot EX6 Filament Extruder
used
- Manufacturer: FILABOT
“Used” Model number: EX6 | Mpn: EX6 | Shipping weight: 75 lbs | Shipping dimensions: 39 x 20 x 12 in | Reference sku: 1696134
- Trusted Seller
4.5" NRM Extruder, 20:1 L/D, 150 HP
used
- Manufacturer: NRM
4.5" NRM Extruder, 20:1 L/D, 150 HP Used 4.5" NRM Pacemaker extruder, 20:1 L/D, electrically heated, air cooled, 150 HP DC motor with SCR, control panel with 4 barrel, 1 die zone with temperature controllers.
Cleveland, OH - Trusted Seller
Davis Standard 450 S D8856 Extruder Gear Box
used
- Manufacturer: Davis-Standard
- Model: 450 S D8856
Rebuilt 4.5" Davis Standard Extruder Gear Box Model 450 S D8856 Serial #E3162 S.O. No 46258C 17:1 Gear Ratio 100 RPM H.P. 180
- Trusted Seller
0.75" Brabender Extruder, 25:1 L/D, Model 2503
used
- Manufacturer: Brabender
- Model: 2503
0.75" Brabender Extruder, 25:1 L/D, Model 2503 Used 0.75" Brabender extruder, model 2503, 25:1 l/d, electrically heated, 3 barrel zones, 1 die zone, 3 hp motor, with control panel, 230 volt, serial# 1313.
Cleveland, OH - Trusted Seller
Killon Davis 2-1/2" Hot Melt Rubber Extruder
used
- Manufacturer: Killon Davis
2 1/2'' Killon Davis Hot Melt Rubber Extruder with power Roll Feed 12.8 to1 L.D. 3 Barrel Zones two Die Zones Air Cooled Eurotherm Controls with Amp Meters Melt Pressure RPM and Amp 40 H.P. D.C. 900 Hrs on...
- Trusted Seller
1.25" Killion Extruder, 24:1 L/D, 5 HP with Bath
used
- Manufacturer: Killion
1.25" Killion Extruder, 24:1 L/D, 5 HP with Bath Used 1.25" Killion single screw extruder, 24:1 L/D, electrically heated, air cooled barrel, jacketed feed section, driven by 5 hp DC motor drive, on stand with co...
Cleveland, OH - Trusted Seller
Theysohn Twin Screw Extruder, 60 HP, 36:1 L/D
used
- Manufacturer: Theysohn Extrusion
Theysohn Twin Screw Extruder, 60 HP, 36:1 L/D Used Theysohn Twin Screw Extruder, co rotating screw, electrically heated, water cooled barrel,(1) feed, (2) top and side vented, (1) top vented, (5) non-vented barre...
Cleveland, OH 
Farrel 18x15 Dump Extruder
used
- Manufacturer: Farrel
Item 6330 - One (1) Used Farrel 18x15" Rubber Dump Extruder, drop extruder, hot feed extruder, feed opening 26” wide x 23.5” deep, 29.2 gearbox ratio, 400 HP 850/2000 RPM, 500 VDC motor, REBUILT SCREW & BARREL, d...
Cleveland, OH
Cincinnati CMT Extruder
used
- Manufacturer: Cincinnati
- Model: CMT
Good condition Cincinnati CMT Extruders manufactured in 2018. Located in Italy and other countries. Click request price for more information.
Italy
Tip: Enter manufacturer, model or keyword
