Used Papermaking

50" MAXSON MSE SINGLE ROTARY KNIFE SHEETER 1994

• Manufacturer: Maxson

One (1) used 50" wide Maxson MSE single rotary knife sheeter, single flying rotary knife cutting a against a stationary bed knife. 53” wide stationary bed knife. 13” – 53” cut off range. 330 fpm. with (1) Shafted...

85" WIDE HARRIS SEYBOLD CJH-S GUILLOTINE CUTTER

• Manufacturer: HARRIS SEYBOLD

One (1) used 85" WIDE HARRIS SEYBOLD CJH-S GUILLOTINE CUTTER. Power backage. Side tables. Recently out of service.

METSO MODEL DF-0 OPTIFINER 250 HP NEW 2013 PF

• Manufacturer: Metso

904464.015 Used METSO DF-0 OPTIFINER DEFLAKER HORIZONTAL LOW CONSISTENCY DEFLAKER REFINER WITH 29-87 PSI OPERATING RANGE, ROTOR SPEEDS TO 1800 RPM, TOP HORIZONTAL DRIVEN WITH GE INDUSTRIAL 250 HP 3/60/460 Volt D...

ANDRITZ MICRASCREEN MS3 STAINLESS STEEL MANUFACTURED 2019

• Manufacturer: Andritz

904464.004 PF USED ANDRITZ MS3 MICRASCREEN , STAINLESS STEEL, STATIONARY PRESSURE FED VERTICAL SCREEN SUITABLE FOR SEPARATION OF FINE SOLIDS, FIBRE RECOVERY, THICKENING AND FRACTIONATION, WITH (3) 27.55" X 70.85...

ANDRITZ MS3 M ICRASCREEN STAINLESS STEEL MANUFACTURED 2019

• Manufacturer: Andritz

904464.003 PF USED ANDRITZ MS3 MICRASCREEN, STAINLESS STEEL, STATIONARY, PRESSURE FED VERTICAL SCREEN SUITABLE FOR SEPARATION OF FINE SOLIDS, FIBRE RECOVERY, THICKENING AND FRACTIONATION, WITH (3) 27.55" X 70.85...

182" FLOODED NIP SIZE PRESS

• Manufacturer: Manchester

182" Flooded nip size press, 60hp, w/ 32.057 x 182" face roll

129" BELOIT TWO ROLL VERTICAL SIZE PRESS

• Manufacturer: Beloit

Beloit 2-Roll 129" Vertical Size Press; with 23.570"D x 129" Face Bottom Roll and 22.725"D Top Roll

131" NIFERN DAAL 3-ROLL COMBINATION SUCTION PRESS 150 PLI

• Manufacturer: NIFERN DAAL

Nifern DAAL 3-Roll Combination Suction Press; 150 PLI; with 26.231"D x 141" Face Suction Roll; 22.055"D x 131.75" Face Hard Nip Roll; 21.143"D x 21.765"D x 128.25" Face Blind Drill Roll' Smoother Rolls; and Conso...

129" MECFAB HEADBOX RATED 1500 FPM 40 TO 150 LBS / 3,300 SQ. FT.

• Manufacturer: MECFAB

PRESS SECTION 250 HP

• Manufacturer: PRESS

26" BOLTON EMERSON DISC REFINER WITH 500 HP MOTOR

• Manufacturer: Emerson

904333.006PF Used Bolton Emerson 26" EMA disc refiner with a 500HP motor.

26" BOLTON EMERSON ELECTRO DISC REFINER WITH 500 HP MOTOR

• Manufacturer: Emerson

904333.007PF Used Bolton Emerson 26" EMA disc refiner

118" J.H. HORNE PRESSURE FORMERS W/ PRESSURIZED SLICE, ADJUSTABLE LIP, COUCH ROLL AND VATS

• Manufacturer: J.H. Horne

*** CURRENTLY REMOVED IN STORAGE 9 - 118" J.H. HORNE PRESSURE FORMERS W/ PRESSURIZED SLICE, ADJUSTABLE LIP, Cylinders 1 – Formers Fan Blowing System 2 – Sections of Rope 2 – Spare Former Heads 1 – Former Parts 1 ...

METSO OPTISCREEN TYPE MS-200HT 05 MANUFACTURED 2013

• Manufacturer: Metso

18' BLACK CLAWSON HCV BATCH PULPER WITH SIZE 3 HYDRAPULPER DRIVE AND 500 HP MOTOR S/S

• Manufacturer: Black Clawson

18' Diameter Pulper. Stainless steel Tub 4:1 Ratio Black Clawson Gearbox S/N P-72-3077 63" Diameter Vokes Rotor 16,000 gl. capacity Lubrication system Presently installed and in good operating condition.