Used Machine Tools

Gripper - Mf17008

Name: Gripper | Arrival date: 05-23-2025 | Dimensions l x w x h (inches): 17 x 13 x 5 | Weight (lb.): 3 | Available quantity: 1

Haimer 14mm Clamping Diameter Hsk A63 Shrink Fit Chuck - A63.140.14.2

• Manufacturer: Haimer

New Open Box, Quantity 1 Name: Hsk A63 Shrink Fit Chuck | Arrival date: 05-02-2025 | Dimensions l x w x h (inches): 9 x 9 x 9 | Capacity: 14mm CLAMPING DIAMETER | Weight (lb.): 8 | Available quantity: 1

Cleco 28nm Cordless Nutrunner - 47baysb28ap3

• Manufacturer: Cleco

482 Rpm, Made In Germany Name: Cordless Nutrunner | Arrival date: 03-31-2025 | Dimensions l x w x h (inches): 7 x 24 x 8 | Capacity: 28NM | Weight (lb.): 10 | Available quantity: 1

Fag 12 1/2" Nj2236em1c3 Bearing - Nj2236em1c3

• Manufacturer: FAG

Name: Fag Nj2236em1c3 Bearing | Arrival date: 04-08-2025 | Dimensions l x w x h (inches): 15 x 16 x 13 | Capacity: 12 1/2" | Weight (lb.): 45 | Available quantity: 1

Atp 2588 Lever Handle Type Pneumatic Impact Wrench 2-1/2in Ingersoll Rand 588

• Manufacturer: Ingersoll Rand

“2" - 4" BOLT CAPACITY” Model number: 2588 | Mpn: 2588 | Shipping weight: 231 lbs | Shipping dimensions: 47 x 33 x 19 in | Additional notes: 2" - 4" BOLT CAPACITY | Reference sku: 1074637

ATLAS TOOL POST GRINDER

• Manufacturer: Atlas

4" DIAMETER WHEEL X 3/8" WIDE WITH A 7/16" BORE 2 SPEED PULLEY SELECTION 1/4 HP, 3450 RPM, 110 VOLTS 1 PHASE MOTOR 5/8" X 20" DRIVE BELT MOUNTS ON 1-1/8" DIAMETER POST

4" Foam Die

4" Foam Die Used 4" foam die with cooling mandrel

HSK 100 TOOLHOLDERS W/ RACK

HSK 100 TOOLHOLDERS W/ RACK

72" WIDE X 48" HIGH DRILLED & TAPPED ANGLE PLATE W/ 24" X 80" ELECTROMAGNETIC CHUCK & CONTROLLER

72" WIDE X 48" HIGH DRILLED & TAPPED ANGLE PLATE W/ 24" X 80" ELECTROMAGNETIC CHUCK & CONTROLLER -“Time is of the Essence” with regards to the removal of equipment from the auction site premises. This machine mu...

60" WIDE X 44" T-SLOTTED ANGLE PLATE

60" WIDE X 44" T-SLOTTED ANGLE PLATE -“Time is of the Essence” with regards to the removal of equipment from the auction site premises. This machine must be removed by March 20 th , 2026.

36" X 78" DRILLED & TAPPED TWO-PIECE ANGLE PLATES

36" X 78" DRILLED & TAPPED TWO-PIECE ANGLE PLATES -“Time is of the Essence” with regards to the removal of equipment from the auction site premises. This machine must be removed by March 20 th , 2026.

Koyo Needle Non-thrust Roller Bearing, 3pcs - Jtt-1014,pb,l449

• Manufacturer: Koyo

New Open Box, 3pcs Name: Needle Non-thrust Roller Bearing, 3pcs | Arrival date: 09-22-2025 | Dimensions l x w x h (inches): 7 x 7 x 5 | Weight (lb.): 1 | Available quantity: 1

Kennametal Milling Inserts 2 Pkgs - Spex432

• Manufacturer: Kennametal

5 Inserts Per Package,kc715m Name: Milling Inserts 2 Pkgs | Arrival date: 09-25-2025 | Dimensions l x w x h (inches): 7 x 7 x 5 | Weight (lb.): 3 | Available quantity: 1

Mcgill Lot Of 6 Cam Follower Bearing - Cf1sb

• Manufacturer: Mcgill

New Factory Sealed Name: Lot Of 6 Cam Follower Bearing | Arrival date: 10-01-2025 | Dimensions l x w x h (inches): 7 x 7 x 5 | Weight (lb.): 1 | Available quantity: 1

Dodge 1 1/2" Pillow Block Bearing - 123869 P2b-scb-108

• Manufacturer: Dodge

New Open Box, Made In The Usa Name: Pillow Block Bearing | Arrival date: 10-17-2025 | Dimensions l x w x h (inches): 5 x 8 x 3 | Capacity: 1 1/2" | Weight (lb.): 5 | Available quantity: 1