Used Processing in Ontario, Canada

Tank with Pneumatic Lightnin Mixer

• Manufacturer: Lightnin

-Shipping dimensions: length 35" x width 35" x height 49" -316 Stainless -M.A.W.P: 0.42V/10 PSIG -Temp: 300 F -60 L -2 in stock (B2072)

Horizontal Tank

• Manufacturer: Sharpsville Container

-203 IG -MAWP 100 psi @250 F -MDMT -20 F @ 100 psi -9" from the ground to the bottom -64" tall -Certified by Sharpsville container

5 HP Scott Hammer Mill

-Shipping dimensions: length 49" x width 40" x height 30" -Model: Sh18-12 -5 HP -208-230/460 Volts -15-23.2/6.6 AMPS -1725 RPM -3 phase

7 1/2 HP Blower

-Shipping dimensions: Height - 30" x Width - 22" x Length - 42" -Brook Cromptom motor: HP 7.5, 3480 RPM, 575 V, 7.6 A, Type TEFV, 3 PH,

Stainless Auger

• Manufacturer: Rossi Motoriduttori

-Shipping dimensions: 102" L x 22" W x 28" H Rossi Motoriduttori: -3 kW -n2: 175 min

Mixing tank

• Manufacturer: Nord

- Nord mixer on top: 2791 ratio, 63 speed - Nord motor: 1765-145 RPM, 230/460V, 5HP - Diameter is 34" -height is 40" -130 IMP - Overall height 81" - 4 legs are 23" - Stainless steel - Chemical use - Dome bottom

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping Dimensions: 12" length x 12" width x 12" height -Input/output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

DAF System

• Manufacturer: DAF

Aer-O-Flo DAF System Leeson motor: -model C4T17FH3B -RPM: 725 -Volt: 575 -Hz: 60 -HP: 1/2 -Cont duty Baldor Motor: -Frame: 145TC -HP: 2 -Volts: 575 -Amps: 2 -RPM: 1750 -HZ: 60 -3 Phase -Class F

4,000 Litres open top Jacketed tank with mixer mount

-Has port for mixer to be mounted -Jacketed -Legs are 14" tall and stationary -Cone bottom -81" tall x 62" diameter -1.5 threaded port on side -3" bottom port -Open top no lid

Warren Rupp Tranquilizer Model TA2

• Manufacturer: Warren

-Shipping dimensions: Height - 22" x Width - 12" x Length - 12"

Neutro-Vac

• Manufacturer: Simco

-Shipping dimensions: 30" L x 24" W x 52 1/2" H -Intake: 2" -208 V -60 Hz -3 Phase -1 Hp -Model: DC 550

41,783 Litres Stainless-steel Tank with Heating Coil

-Flat bottom and top -Heating coil on inside -Mixer with motor -Man hole on side is -Stainless steel with insulation on the out side -Bottoms valve is 4" -160" tall x 142" diameter -9191 imp gal -Level gage -Manh...

PFS Plastic Film Sealer

• Manufacturer: PFS

-Shipping dimensions: Height - 13" x Width - 18" x Length - 4" -Power: 150-300-400-650W (IMPULSE) -Source: AC110V/60Hz

Cone Mixer

• Manufacturer: SEW-Eurodrive

-Cone container with top mount mixer -Steel stand -SEW-EURODRIVE motor: 230/460 V, 60 Hz, 8.60/4.30 amp, 3 HP, 1700 RPM -Rapport ratio: 62.18:1 -Pos. Montage. Mtg: H5

Gandus Saldatrici Tb - 3 Grease line heat Sealer

• Manufacturer: Gandus

-Shipping dimensions: Height - 20" x Width - 29" x Length - 16" -115 V -50/60Hz -Comes with case