Used Processing in British Columbia, Canada

1993 0.75 MMBTU/hr Sweet Line Heater

0.75MM BTU Line Heater Packager: Presson | Service type: Sweet | Pasc condition rating: C | Skidded: Yes | Housed: Yes | Connection status: Connected | Units available: 1 | Heater type (indirect): Line Heater | C...

1990 25 SCFM 150 psig Instrument Air Package

• Manufacturer: Teco - Westinghouse

25HP Dual Instrument Air Skid Package id: 11398746 | Air compressor package type: Instrument Air Package | Packager: Xebec Inc. | Service type: Sour | Pasc condition rating: B | Skidded: No | Housed: Yes | Connec...

2009 460VAC MCC

• Manufacturer: PLATINUM ENERGY SERVICES

Pasc condition rating: B | Skidded: Yes | Housed: Yes | Connection status: Connected | Voltage ac: 460VAC | Building heated: Yes | Mcc title: 460VAC

2005 500 USG Double Wall Sales Tank

• Manufacturer: De-In Industries

500 gallons TANK AST DW WATER C-020-A Package id: 12227870 | Service type: Sweet | Pasc condition rating: B | Connection status: Connected | Capacity: 500 USG | Capacity(unit of measure): Gallon | Capacity(use se...

2009 1.5 MMBTU/hr Sour Line Heater

Packager: RJU | Service type: Sour | Pasc condition rating: B | Skidded: Yes | Housed: Yes | Connection status: Connected | Heater type (indirect): Line Heater | Coil diameter: 3" | Coil diameter(unit of measure...

Lunden Stacker System - Right Hand

• Manufacturer: Lunden

- Package size 48" wide x 72" tall - Bar type unscrambler - Accumulation chains - Even ending chain fence - Lunden stacker (no stick placer) - Boxing forks to create a fixed package width - Take away chain transf...

LSI Stacker c/w Stick Placer

• Manufacturer: LSI

- Right hand - 8' to 20' - 54" wide x 48" high package - 1-1/2" wide x 3/4" thick x 54" long stickers - Five (5) chainways c/w electric drive - Six (6) forks c/w linear positioner actuator - Five (5) arm hoist c/...

20' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Seven (7) 8" diameter x 34" face bedrolls c/w double single chain drive mounted onto a channel frame - No drive unit

24' Rollcase

• Manufacturer: Canadian Mill Equipment

- Pop up c/w air bags - Rolls are approximately 48" wide - Approximately 24' long - No drive

25' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Eight (8) 6" diameter x 36" wide bedrolls (2-3/16" shafts) - c/w RC80 double single drive chain mounted onto a channel frame c/w legs - 4' centers - No drive unit

Comact Scan Conveyor

• Manufacturer: Comact

- 4" diameter to 12" diameter, up to 16' long - V-Flight scan conveyor, approx. 50' long c/w electric drive - Does not include any controls or scanning - Ready to load

56" x 60" Gruendler Hammer Hog

• Manufacturer: Gruendler

- Opening is 56" wide x 60" long - 900 HP @ 2300 Volt, 3 phase, 60 hertz - Twenty (20) hammers, weight approx. 190 lbs each - c/w spare hammers and grates - Loaded on a truck

Outfeed Belt Conveyor c/w Kickers

- Approximately 6' long - 24" wide belt c/w head and tail pulleys - Three (3) kicker assemblies c/w hydraulic cylinders - 75 HP electric/motor reducer drive - No hydraulic power unit - Dismantled and ready to load

16" Diameter Screw

- c/w drive (5 HP) - No conveyor - 18' long screw

8" x 40' Screw Conveyor (Two sections)

- One section has a 5 HP drive - Can be purchased as single 8" x 40' c/w drive or together 8" x 80' c/w 5 HP drive