- Trusted Seller
WMW Roller leveler - metal flattening machine
- Manufacturer: WMW
With an extensive hydraulic force stresses in metal parts are neutralized and the end-result are straightened sheets/plates. Ideal for straightening heavy duty ramps. Cap: 2200 x 40 mm
Deinze, Belgium - Trusted Seller
Shears for corrugated sheets
- Manufacturer: Bombled
Machine type: Hydraulic shear for corrugated sheets Manufacturer: Bombled Model: 9F Max cutting capacity: 2000 mm (width) × 4 mm (thickness) Drive system: Hydraulic Operator protection: Front safety guard F...
- Trusted Seller
Bending roll 1500 x 3 mm
- Manufacturer: LISSE
Technical Datasheet Machine type: Bending roll Manufacturer: Lisse Rolling capacity: 1500 x 3 mm (working width x max thickness) Roll configuration: 3-roll system Drive system: Motorized Frame: Heavy-duty w...
- Trusted Seller
Motorized bending roll
- Manufacturer: Bradbury
Machine type : Motorized bending roll Manufacturer : Bradbury Control unit : MCE (industrial electrical control panel) Supply voltage : 380 V Phase : 3 Frequency : 50 Hz FLA (Full Load Amperage) : 17.6 A M...
- Trusted Seller
Piranha SEP
- Manufacturer: Piranha
- Model: SEP
Single end punch press with 2 axis positioning table: X-travel: 1500 mm Y-travel: 525 mm
Deinze, Belgium - Trusted Seller
Eichener straightening corrugated plates
- Manufacturer: Eichener
Type DE10001.5 This straighening machines is needed to straighten the corrugated plates. This will eliminate the slight curving of the workpiece after rollforming. For corrugated plates in size 76 x 18 mm. ...
Deinze, Belgium - Trusted Seller
Arku 2600 x 12 mm (STEEL)
- Manufacturer: Arku
Type: AH8000/2500/MSG-40 1 - Decoiler Cap: 10 ton Max width: 2600 mm Hydraulic expansion Hydraulic driven Hydraulic coil lift 2 - Manipulator to feed the plate in the straightener. 3 - Arku straightening unit...
Deinze, Belgium - Trusted Seller
Dimeco Straightener 1691/VV
- Manufacturer: Dimeco
max width: 1525 mm min thickness: 1,2 mm max thickness: 3,5 mm 7 straightening rolls dia 100 mm 4 pitching rolls dia 100 mm
Deinze, Belgium - Trusted Seller
Spiralo for round airducts Ø 100 > 1600 mm
- Manufacturer: Spiralo
Type: SM 33 B - Decoiler, maximale breedte: 220 mm - Rolvormeenheid Minimale diameter luchtkanaal: 100 mm Minimale diameter luchtkanaal: 1600 mm
Deinze, Belgium - Trusted Seller
Haco IMRD 2x 5 ton
- Manufacturer: Haco - Atlantic
max width: 800 mm Including hydro coillift Max sheetwide: 800 mm | Max sheetthickness: 5 mm
Deinze, Belgium - Trusted Seller
Deinze, Belgium - Trusted Seller
Dimeco Mircrofeeder 1160/J
- Manufacturer: Dimeco
Microfeeder 1160/J - max width: 1550 mm - max thickness: 2,25 mm - max speed: 120m/min
Deinze, Belgium - Trusted Seller
Ras 1020 x 2 mm
- Manufacturer: RAS
Ras 1020 x 2 mm Worklength: 1050 mm | Sheetthickness: 2 mm | Length: 2000 mm | Width: 1060 mm | Hight: 550 mm | Weight: 444 kg
Deinze, Belgium - Trusted Seller
Haeusler VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
2 rolls are mechanically driven with driveshafts = no slip possible of workpiece Hydraulic upper lower movement of rolls and support bearing
Deinze, Belgium - Trusted Seller
Ungerer 1800-4,5-9
- Manufacturer: Ungerer
Max capacities: 1800 x 4.5mm // 1500 x 6mm Max sheetwide: 1800 mm | Max sheetthickness: 4,5 mm | Number of flattingcoils: 4+5 rolls (9) Ø80mm | Length: 4200 mm | Depth: 1650 mm | Hight: 2550 mm | Weight: 10200 kg
Deinze, Belgium
Tip: Enter manufacturer, model or keyword