Used Materials Testing in Flanders, Belgium

C182/H Slump cone set. simple set

Slump cone set. set comprising Slump Cone, Base Plate with integrated measuring bridgje, Tamping Rod with integrated measuring rule

C190 Plasticity meter

Plasticity meter

C183 Vebe consistometer, EN, BS STANDARDS

• Manufacturer: Matest

Vebe consistometer

C194-01 Concrete pocket dial penetrometer

Concrete pocket dial penetrometer

C390 Anvil for verification

• Manufacturer: Matest

Anvil for verification comform EN 12504-2 Used for the verification the calibration of the concrete test hammers. Special steel alloy made. Dimensions: dia. 150 by 320 mm. Weight: 16 kg

S246-01 : Falling head permeameter

Falling head permeameter Standard : CEN ISO/TS 17892-11 Used to determine the permeability of fine-grained soils such as clay-like or silty soils. The specimen is confined within the permeameter which is connecte...

A121 Rock cradle to ASTM D5873

• Manufacturer: Matest

Rock cradle to use with C381 rebound hammer Standard: ASTM D5873 It is the equippement used to locate EX or NX core rock specimens during the classification test by the Rock Hammer model C381. Weight: 20 Kg

E010-08 Stainless steel cell, complete

• Manufacturer: Macben BVBA

Test cell, complete (3 pcs)

A110-11 Metal base plate

• Manufacturer: Roche

Metal base plate for polished stone value Standard: 1429 Metal base plate for Polished Stone Value (PSV) tests in laboratory, and for tests on natural stones and concrete block pavers. Supplied WITHOUT specimen c...

Z000,063 mm Sieve dia 200mm, openings 63µm

Sieve ABC-Test diameter 200 mm, openings 63 µm

extension aluminium dia50, 25 mm for ANIX

Extension aluminium Ø50, 25mm, for plate load test

ZORN MINI 3.1 Leichtes Fallgewichtsgerät 120 mm width

• Manufacturer: ZORN

ZORN MINI - 3.1 Light Weight Deflectometer Very light version (less than 10 kg total), easy to take with one person in any car. For determining the dynamic deformation modulus Evd in narrow trenches from 120 mm w...

A122 : Barton combs (profilometers)

• Manufacturer: Lang

Barton combs (profilometers) Used for the evaluation of the surface roughness of rock samples. These simple devices allows very thin steel wires to perfectly lay to the outline of the sample under test, in order ...

SA224 200 kN

AX 01a, Electronic Static Plate Bearing Test Device according to DIN18134:2012-04, CNR BU 146 1992-12, ÖNORM B4417:1979-12, SN 670 317b:1998, TSC 06.720:2003, SB250 4.16, SB2000, NF P94-117-1 : 2000-04, MSZ 2509-...

A113 Skid resistance and friction tester Matest brand

• Manufacturer: Matest

Skid resistance and friction tester ASTM E303, 8204, EN 1097-8, EN 1338, 1339, 1341, 1342, NF P18-578 For the rapid determination of the roughness of a surface, it measures the energy lost when a rubber pad passe...