Used sizing machine

Samuel P-225 Automatic Strapping Machine – 091325847005A

Specifications: MOTORS: Single Phase 115 V., 1/3 Hp Chamber Feed/Strap Take-up Single Phase 115 V., 1/2 Hp Main Drive/Strap Feed

Douglas Machine Inc Shrink Bundler CONTOURS30

• Manufacturer: Douglas

Douglas Machine, Model Contour S30, Inline, intermittent motion, shrink bundler and tunnel. Bundle size range: Length: 5" to 15¾"; Width: 8½" to 22"; Height: 3½" to 12". Equipped with 25" wide x 30" long in feed ...

ARPAC MODEL L-18 PACKAGING MACHINE WITH HEAT TUNNEL

• Manufacturer: Arpac
• Model: L-18

1-(PRE-OWNED) ARPAC HANAGATTA MODEL # L-18 AUTOMATIC IN-LINE L-BAR SEALER. SMOOTH BELT TO BELT TRANSFER AND SOLID SEALING BARS. HAS FILM PIN PERF SYSTEM, TOUCH SCREEN CONTROLS AND ADJUSTABLE HEIGHT FILM INVERTING...

1996 Shanklin CF-3 Side Seal Shrink Wrap Machine

• Manufacturer: Shanklin

Up To 30 Packages a Minute Package Size Range: Variable Speed Painted Steel Construction 460 Volts / 20 Amps / 1 Phase / 60 Hz Spare Parts, Manual, and Electrical Drawing Included

10” X 16” BESELER “117-ST-A” SHRINK WRAP L-SEALER w/ADJUSTABLE HEAT - WIRE TIMER

• Manufacturer: Beseler

1117-ST-A BESELER SHRINK WRAP L-SEALER SERIAL NO 01860047, MODEL 1117-ST-A Imperial Metric EQUIPPED WITH: SEAL & SHRINK OR SEAL ONLY Wire Timer ADJUSTABLE HEAT DIAL CATALOG SPECIFICATIONS: Seal Area, W x L 11" x ...

Omega Dual Lane Shrink Bundler, Model DL-27

• Manufacturer: Omega

Omega Dual Lane Shrink Bundler, Model DL-27 Used Omega shrinkbundler, model DL-27, speeds up to 26 bundles/minute or 150 containers/minute, package size capabilities 2 X 1 X 3, 6 X 1 X 1 and 3 X 1 X 1, bundle des...

2002 Arpac Hanagata Model HP-10Z Automatic L-Bar Sealer w/ Beseler T-18 Heat Tunnel – 050824455003A

• Manufacturer: Arpac

Arpac Hanagata Model HP-10Z Automatic L-Bar Sealer. Machine is capable of speeds up to 30 packages per minute. Has a maximum package size of 0.5″-15″ wide; 4″-18.5″ long; and 0.25″-6″ tall. 24″ maximum web film w...

VC999 ST62 - Shrink Tank

• Manufacturer: VC999

The ST62 shrink tank works on the principle of synchronized immersion in hot water. This machine has been conceived for the smaller and medium sized business, but as far as efficiency, workability and finish are ...

VC999 TR2 - Dryer

• Manufacturer: VC999

TheTR2 dryer is a fully automatic in-line dryer tunnel. The TR2 takes wet products a from a shrink tank, and dries them for immediate labeling or cardboard packaging using air blades.�� It does not require compre...

VC999 HFC Series - Compact HFFS

• Manufacturer: VC999

The HFC Series Horizontal Flow Wrapper is��made to package a wide range of products in 3-side seal pillow bags. This machine can be equipped with two frequency converter units or with two Servo-motors, depending ...

VC999 ST85.47i - Shrink Tank

• Manufacturer: VC999

Electronic control with language selection Stainless steel execution Easy change of flow direction Built-in, adjustable steam exhaust Double-walled with first class insulation Accurate water temperature and water...

VC999 ST6 - Shrink TANK

• Manufacturer: VC999

The ST6 Shrink Tank is the ideal companion for single or double chamber machines. This stainless steel Semi-Automatic dip tank is perfect for small to medium packaging operations for many products. Electronic con...

AFM Model: STC-WSN-2M | Steam Tunnel | w/ Integrated Steam Generator

• Manufacturer: AFM - American Film & Machinery

Units is USED. Some minor scratching/blemishes/streaking can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed from a working environment and was functioning as...

TRIPACK ST-1 Steam Tunnel Shrink Sleever

• Manufacturer: Tripack LLC

Units is USED. Some minor scratching/blemishes/streaking can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed from a working environment and was functioning as...

Axon THERMOPOINT Steam Tunnel | Shrink Sleever | Sleever Tunnel

• Manufacturer: Axon Corporation

Units is USED. Some minor scratching/blemishes/streaking can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed from a working environment and was functioning as...