Used Shopbuilt in British Columbia, Canada

SHOP BUILT CERTIFIED SCREW PILES

• Manufacturer: Shopbuilt

Certified Screw Piles Note: Mill test Certifications will be Provided to the Purchaser 10 of 4 ½” X 22 Ft. c/w 16” Helix **Sold as One Lot – As Shown in the Photos** Located in Kamloops, BC Text Bill for more Info

SHOP BUILT CERTIFIED HELICES

• Manufacturer: Shopbuilt

Certified Helices Note: Mill Test Certifications will be Provided to the Purchaser For 8 5/8” O.D. Pipe Leading Edge: I.D. Rounded & Sharpened 10 of 8 5/8” X 24” X 3/4" 24 of 8 5/8” X 20” X ¾” **Sold as a Complet...

SHOP BUILT WIDE FLANGE BEAM & CORNER STRUCTURES

• Manufacturer: Shopbuilt

Wide Flange -- Beams & Corner Structures Used HP 304 X 405 Beam 2 of 16” X 15” X 20 Ft. 4 of 16” X 15” X 10 Ft. 8 of Fabricated L Shape Structures 10 Ft. X 10 Ft. X 5F Ft. Total Footage = 280 Ft. Weight @ 155.5 L...

SHOP BUILT CERTIFIABLE SPREADER BAR

• Manufacturer: Shopbuilt

Spreader Bar Serial # FCS-SB-99-04 Capacity: 20 Ton Spread: 11 to 19 Ft. Certification: Expired Note: Engineered Design Drawing in the Photos A Copy of the – Engineered Design Drawing Will be Provided to the Purc...

SHOP BUILT 24" CERTIFIED STRUCTURAL PIPE

• Manufacturer: Shopbuilt

Certified Structural Pipe Note: Mill Test Certifications will be Provided to the Purchaser 6 of 24” X .5” ERW Pipe Approx. Total Weight: 45,180 Lbs. **To Be Sold as One Lot – ALL Six – As Shown in the Photos Loc...

SHOP BUILT SCREW PILE ADAPTERS 3" HEX DRIVE

• Manufacturer: Shopbuilt

Screw Pile Adapters 3" Hex Drive 3 of 8 5/8” 2 of 9 5/8” 1 of 4” 1 of Square To Hex Head **Sold as One Lot only – as Shown in the Photos** Located in Kamloops, BC Text Bill for more info

SHOP BUILT CERTIFIED SCREW PILES

• Manufacturer: Shopbuilt

Twelve of Screw Piles Note: Mill Test Certifications will be Provided to the Purchaser Ten of 4.5” X 22 Ft. Piles c/w 20” X ¾ “ Helices Two of 8 5/8” X 20 Ft. Piles c/w 24” X ¾ “ Helices **Complete Lot Only – As...

SHOP BUILT CERTIFIED HELICES

• Manufacturer: Shopbuilt

Certified Helices Note: Mill Test Certifications will be Provided to the Purchaser For 8 5/8” O.D. Pipe Leading Edge: I.D. Rounded & Sharpened 20 of 20” X ¾” 15 of 24” X ¾” **Complete Lot Only – As Shown in the P...

36 in x 36 in Shop Built Ball Mill

Continuous flow. 2½ in. infeed. 4 in. discharge. Chain driven through a GM transmission coupled to a Radicon Size 3 reducer - Unlined shell. Mounted on 48 in. x 60 in skid.