Used Shrink Wrapping Machines

2021 Polypack ILB-24 Shrink Bundler

• Manufacturer: Polypack

POLYPACK Inc. ILB-24 Shrink Bundler, Unit was at a Research and Development facility where new items were tested for production, unit was tested no problems just pulled for a different setup. These are very versa...

VC999 TR2 - Dryer

• Manufacturer: VC999

TheTR2 dryer is a fully automatic in-line dryer tunnel. The TR2 takes wet products a from a shrink tank, and dries them for immediate labeling or cardboard packaging using air blades. It does not require compres...

TEXWRAP # 2202 SS CONTINUOUS MOTION SIDE SEAL SHRINK WRAP SYSTEM W/ TEXWRAP # T-1322/2 DUAL CHAMBER SHRINK TUNNEL - PENDING LS

• Manufacturer: Texwrap
• Model: 2202 SS

1-(pre-owned) TEXWRAP # 2202 SS CONTINUOUS MOTION SIDE SEAL SHRINK WRAP SYSTEM W/ TEXWRAP # T-1322/2 DUAL CHAMBER SHRINK TUNNEL W/ ALLEN BRADLEY PLC CONTROL, SWIVEL TOUCHSCREEN OPERATOR INTERFACE. ADJUSTABLE F...

Preferred Packaging PP180828 Heat Shrink Tunnel 220V 40A 60Hz 1PH Top Only

• Manufacturer: Preferred Packaging

Used, in Good Working Condition, Tested OK. This is the top unit only. No conveyor. Company this came from probably just mounted on their own conveyor system. This heats up to couple hundred degrees so not just a...

Beseler T-18-8 Heat Shrink Tunnel

• Manufacturer: Beseler

Beseler T-18-8 Heat Shrink Tunnel with 8" tall by 18" wide opening and 36" length.

BESELER 2016 MTB-SB-111 HOT KNIFE L-BAR SEALER SHRINK WRAP SYSTEM

• Manufacturer: Beseler

BESELER SEMI-AUTOMATIC SHRINK WRAPP SYSTEM BESELER MODEL 2016 MTB-SB-111 HOT KNIFE L-BAR SEALER SERIAL NUMBER 05052077 FIM PIN PER MAGNETIC LOCK HOLD DOWN TAKEAWAY CONVEYOR SEAL AREA 20" X 16" SPEED UP TO ...

2018 Hartness Global Shrink 4510-80

• Manufacturer: Hartness

Continuous motion tray packer and Shrinkwrapper for PET, Glass Bottles or Canned Product, Will run trays + shrink film, Max Speeds up to 60 Cycles/Minute, Will run Loose Product or Cartoned Product into Trays, Al...

Arpak model 122248 Heat Shrink Tunnel

Arpak model 122248 Heat Shrink Tunnel with 12” tall tunnel opening that is 22” wide by 48” Long.

Beseler TD-16-10 Shrink Tunnel

• Manufacturer: Beseler

Beseler TD-16-10 Shrink Tunnel

Arpac Shrink Tunnels XT18

• Manufacturer: Arpac

Arpac, Model XT18, Convection shrink tunnel with number of product per minute and hour – depending on materials and application. Equipped with 12" in Height; 21" in Width total aperture with 73" Long shrink heat ...

Arpac Shrink Bundler 737C

• Manufacturer: Arpac

Arpac, semi automatic, inline, shrink bundler and tunnel. Rated from 1 to 15 bundles per minute – depending on materials, application and operator dexterity. Product size range: 6" to 18" in Length x 6" to 35" in...

Arpac Shrink Bundler 737C

• Manufacturer: Arpac

Arpac, semi automatic, inline, shrink bundler and tunnel. Rated from 1 to 15 bundles per minute – depending on materials, application and operator dexterity. Product size range: 6" to 18" in Length x 6" to 35" in...

Tampco Shrink Bundler FA36

• Manufacturer: Tampco

Tampco, Model FA36, automatic inline, stainless steel shrink bundler and tunnel system. Rated from 1 to 25 bundles per minute – depending materials, application and operator dexterity. Package size range: up to 3...

Arpac Shrink Tunnels VT122272

• Manufacturer: Arpac
• Model: VT122272

Arpac VT122272, Inline shrink tunnel rated up to 100 feet per minute with number of product – depending on materials and application. Aperture: 12" in Height; 22" in Width. Tunnel: 72" in Length. Equipped with 92...

Shrink Tech Systems STS-1509-2

• Manufacturer: Shrink Tech Systems

Shrink Tech Systems STS-1509-2 Heat Shrink Tunnel. 16″ wide x 36″ long rod conveyor belt. Electric heated coils, with controls. 220V/1PH/60HZ, 27 Amps.