Used Processing in New Jersey, USA

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216001

• Manufacturer: Trane

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2...

Packed Column - IPP# 222790

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Packed Column - IPP# 222789

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221216

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact, and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by a...

Cytiva 6098 Column - IPP# 239339

• Manufacturer: Cytiva

2000 Liter/Hr., 316 SS, polished to 180 grit finish, modular chromatography system, manufactured by Cytiva/GE- ATKA system # 6098 6 inlets, 4 outlets, two column connection, five head diagram pumps. Rated for 6 b...

Reactor Body, Kettle Batch-Type Stainless Steel 316 - IPP# 210499

• Manufacturer: Hamilton Kettle

sanitary reactor body, Wall thickness: 0.25" thick side wall, 0.220" thick top head, 0.218" thick bottom head Sanitary construction, vessel and jacket are insulated and covered with a SS shroud. Previously used f...

Classifier 762 mm (30 in) Stainless Steel 304 - IPP# 207942

• Manufacturer: Sweco

lined Turbo-Screen Classifier For scalping or dedusting on screens as fine as 20 microns Suction feed through 6" inlet Undersize particles are passed through the screen then are precipitated from the conveying ai...

Sterilizer - IPP# 207687

Designed for pass thru loading and unloading, with quick open doors front and back. Original Installation to a clean room 316 SS lined chamber Modified and re-rated in 1993 by Industrial Fabricating and Engineeri...

Tubular Reactor Stainless Steel 316 - IPP# 232538

• Manufacturer: Snowtech Hydro Cracker & Fisher Tropsch

Pilot plant, including an Agilent Tech Model 7890A-GC. Designed to operate at up to 725 psig and 572 degrees F in the auxiliary process vessels and 932 degrees F in the reactor tubing. The current set up includes...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 225440

• Manufacturer: Heinkel

new bearings, seals, belts, rebuilt hydraulic unit, and run in by the OEM 1600 RPM Maximum Solid Haynes Hastelloy C 22 for all process parts, 316SS for balance of exterior parts Clean in place nozzles for solids ...

Nash Pump-Vacuum Model: SC2SS with vapor recovery system - IPP# 207389

• Manufacturer: Nash

Nash SC2SS Vacuum pump, with vapor recovery system Test # 90Y002 The system includes the following equipment; a vacuum pump, two heat exchangers, a separating tank, and seal pots. The direct drive vacuum pump, is...

Still Stainless Steel 316 - IPP# 230720

• Manufacturer: Still

4700 lbs/hr Pure Steam Generator Falling film design to remove pyrogenic material Steam heated. Electricals rated 3.0 kW, 480 volt, 60 cyc, 5.2 amp with 0.5 kW 120 volt 4.2 amp, 60 cyc controls. All product surfa...

Stainless Steel 316L Centrifuge-Lab - IPP# 239308

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Stainless Steel 316L Centrifuge-Lab - IPP# 239307

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert The system offers these advantages Single use, rapid changeover dispo...

Centrifuge-Disc Bowl 30 kW (40.2 HP) Stainless Steel - IPP# 220241

• Manufacturer: Alfa Laval

manufacturers #881150-02-S-03-SK-02-0259 feed density 1110 kg/cm3 sediment density 1251 kg/cm3 control fluid density 1000 kg/cm3 process temperature 0-100 deg C 438mm diameter bowl Swep 316 s/steel (1.4401) plate...