Used Foundry & Casting in Baden-Württemberg, Germany

1999 OMS Die Casting Cell

consisting of melting furnace Striko West furnace W 65 SL, built in 1997, serial no.: 55288, die casting machine OMS, spraying robot Fanuc, incl. robot control, parts removal robot Kuka KR 15-2 built in 1999 incl...

2007 Frech DAK 580/62 Die Casting Cell

• Manufacturer: Frech

consisting of dosing furnace Westomat 65 S, 540 dm3, . 4568, Die casting machine Frech DAK 580-62, Spraying robot Fanuc m710ic, incl. robot control and touch panel, Parts removal robot Fanuc R2000ic, incl. robot ...

2000 FRECH ZC80/180

• Manufacturer: Frech

Used furnace cabinet for die casting machine make Frech type DAW 80 - suitable for multi-chamber furnace make MELTEC - type 80/180 with individual controllers. Function tested by the manufacturer.

2007 FRECH Spraymotion 411 E

• Manufacturer: Frech

Used Spraymotion 411 E electric sprayer for use on die casting machines. The device is checked for function by the manufacturer. Including spraying and blowing bar (SR system with regulating nozzles) and stand 24...

1994 FRECH MOS 5/20 U

• Manufacturer: Frech

Used furnace for use on DAW5 or DAW20 die casting machines without furnace cabinet

2004 Robamat 5201

• Manufacturer: Robamat

Used heating device from Robamat for use on die casting machines. This single-circuit device is designed for temperature control of a die casting tool with oil. Dismantled from ongoing production. The device was ...

1998 FRECH Weightcontrol 2000

• Manufacturer: Frech

Used scales for use on die casting machines up to a unit weight of 2000gr. The device was checked and repaired by the manufacturer. Weighing cell and control board replaced

2024 FRECH W20Zn-RC

• Manufacturer: Frech

Equipment of the machine 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment...

2001 FRECH M200/120

• Manufacturer: Frech

Used machine furnace make Meltec type M 200/120 for use on hot chamber die casting machines make Oskar Frech with 200 tons for processing magnesium alloys. Melting capacity per hour 120kg/h 54 kW connected load. ...

2017 ROBAMAT 2212

• Manufacturer: ROBAMAT

Used Robamat heating and cooling unit for use on die casting machines. This dual-circuit device is designed for the temperature control of a die casting tool with water. The device was checked, serviced and repai...

2024 FRECH W200Zn-ST

• Manufacturer: Frech

Equipment of the machine 1.1.1 Motorized safety gate on the right in the casting direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - energy efficiency 2.0.1 Ejector assista...

2014 FRECH ZC200/250

• Manufacturer: Frech

Used machine furnace make Meltec type ZC 200/250 for use on hot chamber die casting machines make Oskar Frech DAW 200 for processing zinc alloys. Melting capacity per hour 250kg/h 36 kW connected load. Switch cab...

2003 Frech Espana DAW 125 PD SBC3

• Manufacturer: Frech

Used die casting machine DAW 125 with SBC3 control for the use of zinc alloys. Available as a basis for a general overhaul at the manufacturer's plant

1995 FRECH DAW 200S

• Manufacturer: Frech

Used die casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available by arrangement The manufacturer recommends a general overhaul in the overhaul plant. This can be carried out on requ...