Used Foundry & Casting in Germany

Trusted Seller
Faceplate of cast iron - type 560 4765
- Manufacturer: Guss
Face plate, face plate chuck, four-jaw chuck Feed size: Ø 560 mm | Short taper: Ø 122 mm | Hole circle: Ø 170 mm | Mass: 100 | Internal storage: Hall 3 Aisle 3
Wiefelstede, Germany
Trusted Seller
Faceplate of cast iron - type 450 10222
- Manufacturer: Guss
Face plate, face plate chuck, four-jaw chuck Feed size: Ø 450 mm | Cone receptacle: Ø 110 mm | Groove: 16 mm | Mass: 66 | Internal storage: 3A20902
Wiefelstede, Germany
Trusted Seller
Clamping angle of cast iron - for vise 17199
- Manufacturer: Guss
Clamping angle for workpiece clamping, measuring device, for vice
Wiefelstede, Germany
Trusted Seller
Faceplate of cast iron - size 490 mm 19743
- Manufacturer: Guss
Faceplate, faceplate chuck, four-jaw chuck, facing chuck
Wiefelstede, Germany
2008 FOUNDRY SERVICE Krangießpfanne
- Manufacturer: FOUNDRY SERVICE
Capacity approx. 2,000 kg Fe / 700 kg Al, clear ladle Ø 800 x 1,000 mm, total height approx. 1,800 mm, empty weight (without FF lining) approx. 700 kg, ladle suspension, self-locking oil bath gearbox, type RSD 80...
Meinerzhagen, Germany
Trusted Seller
Faceplate of cast iron - type 900 mm 16832
- Manufacturer: Guss
Face plate, face plate chuck, four-jaw chuck Feed size: Ø 900 mm | Short taper: 11 | Cone: Ø 196 mm | Hole circle: Ø 235 mm | Through hole: Ø mm | Mass: 238 | Internal storage: 3B30903
Wiefelstede, Germany
Trusted Seller
Faceplate of cast iron - type 400 mm 19753
- Manufacturer: Guss
Face plate, face plate chuck, four-jaw chuck Feed size: Ø 408 mm | Threaded receptacle: M95 x 6 mm | Mass: 52 | Internal storage: 3A20503
Wiefelstede, Germany
Trusted Seller
Faceplate of cast iron - type 500 mm 19758
- Manufacturer: Guss
Face plate, face plate chuck Feed size: Ø 500 mm | Camlock: Short taper flange, taper size 11, bolt circle Ø 235 mm | Mass: 67 | Internal storage: 3A21103
Wiefelstede, Germany
Trusted Seller
Faceplate of cast iron - type 500 mm 19744
- Manufacturer: Guss
Face plate, face plate chuck Feed size: Ø 500 mm | Camlock: Short taper flange, taper size 8, bolt circle Ø 171.4 mm | Mass: 54 | Internal storage: 3A20403
Wiefelstede, Germany
Trusted Seller
Underfloor box from Bethmann / Kransteiner - gray cast iron 19227
- Manufacturer: Bethmann/Kransteiner
Underfloor box cast iron Manufacturer: Bethmann lightning protection and lightning protection Kransteiner | Opening: 115 x 170 mm | Number: 3x available | Dimensions: 272/195 / H115 mm | Mass: 5,2 | Internal stor...
Wiefelstede, Germany
Trusted Seller
Platen of cast iron - 500/500 / H125 mm 12275
- Manufacturer: Guss
Clamping plate, Marking and spotting plate, Measuring plate, Measuring table, Welding table, Welding table, Levelling plate -with supporting ribs
Wiefelstede, Germany
Trusted Seller
Platen of cast iron - 1000/720 / H200 mm 11660
- Manufacturer: Guss
Clamping plate, welding table, welding table, straightening plate, straightening table -with supporting ribs
Wiefelstede, Germany
Trusted Seller
Faceplate of cast iron - size 400 mm 11748
- Manufacturer: Guss
Faceplate, faceplate chuck, four-jaw chuck, facing chuck
Wiefelstede, Germany
Trusted Seller
Faceplate of cast iron - diameter 450 mm 7693
- Manufacturer: Guss
Face plate, face plate chuck, four-jaw chuck Food size: Ø 450 mm | 4: Jaw chuck | Admission: thread | Thread inside: Ø 69 mm | Mass: 55 | Dimensions: 450/150 mm | Internal storage: 3A20902
Wiefelstede, Germany
Trusted Seller
Faceplate of cast iron - type 440 mm 19757
- Manufacturer: Guss
Face plate, face plate chuck, four-jaw chuck Feed size: Ø 440 mm | Mass: 74 | Internal storage: 3A20703
Wiefelstede, Germany
Lüber LW-FDA 825 Foundry & Casting
- Manufacturer: Lüber
- Model: LW-FDA 825
Good condition Lüber LW-FDA 825 Foundry & Castings available between 1989 and 1998 years. Located in Belgium and other countries. Click request price for more information.
Belgium