Used Sheet Metal Processing

Trusted Seller
Lockformer, Mestek Lockformer Triplex Cleatformer
- Manufacturer: Lockformer
Pre-owned Lockformer Triplex cleatformer with S-cleat, drive-cleat inboard, 5/16″ Pittsburgh rolls and 4-in-1 rolls outboard, and S&D Cutter attachment. Serial number TRI1620. 3phase/230volts. The flexible Loc...
Lynchburg, VA
Trusted Seller
Lockformer, Mestek Lockformer Spiral Tube Former 2.0 for Spiral Duct
- Manufacturer: Lockformer
Call for Status and Pricing up to 18 gauge (1.25 mm) thickness with a maximum speed of 235 ft/min (71 m/min) from 28-14 gauge (0.50-2.0 mm) thickness with maximum speeds of 287-344 ft/min (84-104 m/min) Features ...
Lynchburg, VA
Trusted Seller
Lockformer, Mestek Lockformer Spiral Tube Former 1.2 for Spiral Duct
- Manufacturer: Lockformer
Call for Status and Pricing up to 18 gauge (1.25 mm) thickness with a maximum speed of 235 ft/min (71 m/min) from 28-14 gauge (0.50-2.0 mm) thickness with maximum speeds of 287-344 ft/min (84-104 m/min) Features ...
Lynchburg, VA
Trusted Seller
Lockformer, Mestek Lockformer Standing “S” Cleat machine – 10 station
- Manufacturer: Lockformer
Call for Status and Pricing The Lockformer Standing “S” Cleat Roll Former | 10 Station allows you to — in one pass — form a shape that combines a conventional “S” cleat with a standing seam for greater strength a...
Lynchburg, VA
Trusted Seller
Lockformer, Mestek Lockformer Stand-alone 6016 Beader
- Manufacturer: Lockformer
Call for Status and Pricing Beading is a cost-conscious way to stiffen ductwork. It is 5 times faster than cross-braking and uses only one operator. The Lockformer 6016 Beading Roll Former was designed to meet th...
Lynchburg, VA
Trusted Seller
Rollformer Flush wall/soffit panel machine FL105
- Manufacturer: NBH Machinery
Call for Status and Pricing FL105 – 1″ Flush Wall/Soffit Panel Machine or the FL15 – 1½” Flush Wall/Soffit Panel Machine. ● Complete with Hydraulic Drive & Hydraulic Front Scissor Shear ● 3 HP Electric-Hydraulic ...
Lynchburg, VA
Trusted Seller
Flagler Collar Machine 6″ 32-000
- Manufacturer: Flagler
Call for Status and Pricing This machine will form the Spin Collar pocket, coil, crimp and bead. Complete with hardened outrigger guide.
Lynchburg, VA
Trusted Seller
Mestek Iowa Precision Colatch HVAC Duct Collar Attaching Machines CL-C814
- Manufacturer: Iowa Precision
Call for Status and Pricing The Iowa Precision Colatch HVAC Duct Collar Attaching Machines — field-proven and multi-functional — form a bead for the collaring operation in producing boots and other furnace fittin...
Lynchburg, VA
Trusted Seller
Mestek Iowa Precision Colatch HVAC Duct Collar Attaching Machines CL-D1420
- Manufacturer: Iowa Precision
Call for Status and Pricing The Iowa Precision Colatch HVAC Duct Collar Attaching Machines — field-proven and multi-functional — form a bead for the collaring operation in producing boots and other furnace fittin...
Lynchburg, VA
Trusted Seller
Flagler 24ga Reeves Snap Lock Machine 21-H00-SL
- Manufacturer: Flagler
Call for Status and Pricing 24ga Reeves Snap Lock Machine
Lynchburg, VA
72 inch Sheet Metal Brake | Hydraulic Box and Pan Brake
6′ x 10Ga. Hydraulic Box and Pan Brake with free angle set-up control Taiwan Machines ISO 9001 certified Hydraulic adjustment for opening Hydraulic power clamping for workpiece 26” manual back gauge with handwhee...
Sutton, MA
Binks Paint line
- Manufacturer: Binks
"Paint line is a continuous chain on edge line with a primer booth, flash oven, spray booth and curing oven. The entire paint line is clean and functional. Located in Two River, WI "
Bloomfield Hills, MI
MFG CNC Motorized Sheet Metal Folding Machine (0,3 – 2,5 mm thickness / 2050-3200 mm length)
0,3 – 2,5 mm thickness / 2050-3200 mm length 180 mm opening height capacity on the upper beam. Eccentric upper beam power transmission system for rapid clamping/unclamping. 10 and 25 mm wide single piece folding ...
Sutton, MA
SFA CNC Servo Sheet Metal Folding Machine (0,3 – 4 mm thickness / 2050-4200 mm length)
0,3 – 4 mm thickness / 2050-4200 mm length Clamping beam with 350 mm opening height and 170 mm high, segmented goat foot tools. Dual drive clamping beam with ball screw spindle system for more clamping power. 150...
Sutton, MA
MFE CNC Servo Sheet Metal Folding Machine (0,3 – 5 mm thickness / 2050-4200mm length)
0,3 – 5 mm thickness / 2050-4200mm length Clamping beam with 180 mm opening height and dual servo driven ballscrew spindle system. 30° single piece sharpnose tool. 15 and 40 mm wide folding beam tools, single pie...
Sutton, MA
RAS Multibend-Center 79.26 Sheet Metal Processing
- Manufacturer: RAS
- Model: Multibend-Center 79.26
Good condition RAS Multibend-Center 79.26 Sheet Metal Processing available between 2006 and 2013 years. Located in USA and other countries. Click request price for more information.
USA