Used Processing in Wallonia, Belgium

Pressure blower, 2500 m³/h, Pressure 6802 Pa

• Manufacturer: RUCON

Make: RUCON | Weight: ± 120 kg | Dimensions: length 900 mm, width 620 mm, height 1100 mm | Motor: 7,5 kW, 380/660 V, 2930 rpm | Air outlet: 155 mm x 110 mm | Capacity: 2500 m³/h | Pressure: 6802 Pa

Moulding machine BMD, type ARPA 300

Pressing capacity 15 000 kg Lifting by rollers Weight: ± 2600 kg | Dimensions: length 1100 mm, depth 1500 mm, height 2300 mm | With table: 960 mm x 580 mm | Pressing stroke: 130 mm | Lifting stroke: 220 mm | Jolt...

Comrpessed air sprayer for coating, ± 40 l

• Manufacturer: RHONA

External dimensions: length 600 mm, width 500 mm, height 960 mm Air inlet with pressure regulator, overpressure valve On 2 wheels With pressure gauge on the cover

Black marble surface plate, 1200 mm x 800 mm

• Manufacturer: OELZE

On substructure (steel) With 5 adjusting screws Make: OELZE | Weight: ± 500 kg | Dimensions: length 1200 mm, width 800 mm, height 840 mm

1989 Fixed electric melting furnace HINDENLANG, 300 kg aluminium

• Manufacturer: Hindenlang

Melting furnace for aluminium or brass Crucible typ BU 300 With pivoted cover With temperature sensors Advantage: the heating resistors can be changed from the outside without moving the crucible

Freehand sandblast unit with dust filter

• Manufacturer: STRAALTECHNIK

Dimensions: length 1650mm + 1300mm, width 1500mm + 1200mm, height 2970mm + 1150mm Sandblast barrel ± 150 l with ± 7 m blasting hose (pipe) and blast nozzle with suction cyclone (for 4 flexible hoses Ø 100mm for b...

Steep conveyor 30 000 mm, useful width 1150mm

External dimensions: length 32 850 mm, width 1360 mm, height 580 mm Motor: 0,75 kW, 220/380 V, type gear motor, 1,8 rpm at the outlet Feet adjustable in height Roller covered with rubber Transmission from the mot...

Vibrating needle for beton with electric drive unit

With cable of 10 m to the drive unit With 5 m in protection hose up to the needle

Shaking device for ladles and furnaces, Ø 600 mm to 900 mm

Small grantry crane to put on top of ladle or furnace equipped with electric winch, max. capacity 700 kg to move inside of the lining former on support plate with 3 pneumatic hammers

Overband magnet STEINERT, 2,7 KW 900 mm x 750 mm

• Manufacturer: Steinert

With transformer / rectifier and switch Weight: 2000 kg | Dimensions: length 2250 mm, width 1150 mm, height 900 mm | Motor: 2,2 kW, 220/380 V, make VDE, 1430 rpm | Magnet surface: 900 mm x 750 mm | Belt width: 80...

Moulding boxes, 620 mm x 600 mm x 460 mm

With trunions With bushings 4 clamping pins Weight: 110 kg/pc

Hammer mill, 15 kW, with perforated bottom

Motor: 15 kW, 220/380 V, make ABB, type MBUL 180 L4, 1445 rpm Drive over 6 V-belts 4 hammer ranges each with 8 hammers Width 310mm, Ø ± 400mm With interchargeable qualibration sieve bottom With small exhaust for ...

2003 Dust filter AEROB, 2000 m³/h to 2500 m³/h, stainless steel

• Manufacturer: AEROB / BG Filtration
• Noise level: 80 decibel

With extraction socket, Ø 140mm With stainless steel filter housing Pneumatic filter cleaning Dust bucket Connection tubes and bows With silencer With exhaust on the floor next to the filter With CE sign With sta...

Induction melting furnace INDUCTOTHERM, 250 kg

• Manufacturer: Inductotherm

With 2 furnaces for alternativ working With transformer With hydraulic With cooling tower With water pump With control board

1980 Moulding machine KÜNKEL WAGNER, APM.f1

• Manufacturer: Künkel Wagner

Moulding machine without foundation With pneumatic drived head pivoting With pneumatic table vibrator