Used Processing in Opole, Poland

Furnace, blowing and extraction fans

Fans of various parameters, in working order.

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

HEW worm pump, stainless steel, food grade.

Mobile Screw Pump / Mobile Schneckenpumpe 7,5kW

Conveyor belt, conveyor belt TA 260

Horizontal length: 3.50 m, diagonal length: 2.50 m Belt width: 60 cm Discharge height: 180 cm

Transverse feeder 5-row ascending PP 227

Length ( transport road ) 4.80 m ( horizontal part 2.50 m , slant 2.30 m ) Width 4.00 m Distance between guides 150 x 90 x 90 x 60 cm Elevating feeder to a height of about 2,00 mm Motor 2 PS

Plate chain, transport

pitch 200 mm ( from pin axis to pin axis ) thickness of insert 10 mm width between inserts inner 45 mm width between inserts outer 65 mm height of plate 60 mm We have about 80 mb

Buffers, hot water tanks, capacity 18,000 l

Buffer with a capacity of 18,000 liters Height 458 cm Wall thickness 6 mm Diameter without insulation 2500 mm Diameter with insulation 2900 mm Two hot water buffers, sealed, freshly dismantled due to replacement ...

Viessmann 720 KW oil furnace

Capacity 720 KW Year 1995

Emergency cooler for 3.5 MW furnace

Total of 8 fans, under them high-efficiency coolers Two segments, one segment will cool 1500 KW

Atlas Copco GA 55 13 compressor

• Manufacturer: Atlas-Copco
• Model: GA 55

TYPE GA 55 Pressure 10 bar Engine 55 KW Year 2000

Conveyor belts , conveyor belts, driven TA 257, TA 258

Length 3.00 m Belt width 30 cm, belt with takers Total width 45 cm Height 35 cm

Conveyor belt, conveyor belt, driven TA 255

Length 5.50 m Tape width 30 cm, tape with takers Total width 50 cm Height 35/75 cm

Roller table, driven, with pneumatic locks PR 257

Table length 6.90 m Roll length 130 cm Diameter of the roll 80 mm Height 85 cm Distance between rollers in the axis of rollers 20 cm

Vibrating trough, vibrorn 17

Length 8.30 m Trough width 65 cm Total width 80 cm Gutter height 20 cm Total height 80 cm Sieve size 65 x 60 cm, fraction 40 x 40 mm Motor approx. 5 KW