Used Processing in British Columbia, Canada

Canadian Buffalo Axial 24 in. Ventilation Fan

• Manufacturer: Buffalo

Crompton 3 HP Motor : 1740 RPM. 440 Volts. 3 Phase. 60 Hz.

Alphair 60 in Ventilation Fan

Model 6000 VAX 2700. Serial No. 64746 & 64422. Full bladed. 60 hp. 1200 rpm. 575V. 70,000 CFM capacity. Including inlet bell, screen and support legs.

Meco 12 in. Ventilation Fan

• Manufacturer: Meco

Diameter: 12in | Height: 13in

Furnace auxiliary contact

9ft Dia. x 25ft Tall Cyclone and 125HP Centrifugal Blower

• Manufacturer: Wheeler & Reeder

Cyclone: Comes with Fabricated Steel Stand Blower Mounted on Steel Frame

Eriez Tuned TM 2412 Vibratory Feeder

• Manufacturer: Eriez

Volts: Amperes: Motor: Size: 10 In. x 26 In. | Overall dimensions: 16 In. x 46 In. x 22 In. (W x L x H). | In: 11 Max. | Out: 3 EA. | Hertz: 50/60. | Phase: 1. | Style: 4N933129. | Ser. no.: 81629-1. | Volts: 230...

Recycling Conveyor 24 in. x 9 ft.

3.5 in. sides. 24 in. wide x 9 ft. long. 1.5 in. rubber cleats on belt. 4” pulleys. Rubberized head pulley. Steel tail pulley. 6” screw belt take ups. Chain drive sprocket.

One Million BTU Gold Bullion Furnace

Propane fired. 3 hp high pressure blower. Gas train and ignition control system. 24 in. dia. x 26 in. deep combustion chamber. 2 cubic foot crucible. Manual gear operated pouring system. All mounted on common ski...

Twin City 490 Centrifugal Blower

4 7/16" Shaft Mounted on operating frame Unit is reported in excellent condition. Last used with a 300 hp motor (not included)

Twin City 45 Centrifugal Blower

Twin City Centrifugal Blower. 16.5 in. inlet. 15 in. x 16 in. top outlet. 15 in. wide housing. Mounted on 9 ft. x 9 ft. deck. 12 ft legs. Unit is reported in excellent condition.

H12 REF Cooler Unit

Temperature controls Overall Dimensions: Serial: 20024300 | Compressor model: AE630-AR-717-A2 | Motor hp: 0.33HP (1/3HP) | Voltage: 115 Volts | Radiator: 10in Long x 10in High, 3.5in Thick | Length: 26in | Width:...

Donaldson Power-Core CPC-4R Dust Collector

• Manufacturer: Donaldson / Torit / DCE

Valves: 4 Goyen Air Operated. With Goyen RCA3-5V Pilot Solenoid Valve Controller Rotary Valve on Disposal Feed: Mounted on 4in x 4in Angle Iron Frame Overall Dimensions:

Torit Down-Flo Cartridge Style Dust Collector

• Manufacturer: Donaldson / Torit / DCE

Fike Vmax 12in x 18in Single Element, Explosion Vent Pulse Jet Cleaning Goyen RCA6 6-Solenoid Valve Enclosure 6 Diaphragm Valves

24in Diameter Hammer Mill

1.5in x 4in Bars 12 Bars per Ser Mounted on Channel Frame Overall Dimensions:

Triple S Dynamics 30 in. x 25 ft. Slipstick Conveyor

Horizontal Motion Conveyor 30in Wide x 25ft Long Stainless Steel Trough Removable Covers 3HP Belt-Drive Motor 1200 RPM 220/440 Volt (Please contact if different voltage is required.) Vibrating Drive Mechanism