Used Machine Tools in Saxony, Germany

ERNAULT-TOYODA coolant reservoir

• Manufacturer: Ernault Toyoda

Coolant tank with pump ERNAULT-TOYODA 250 liters (e.g. for Ernault-Toyoda HES52) pump 120 l/min 3,5 bar 1.1 kW 220 / 380 V used, tested !

WMW clamping drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 M1 Motor: KMR 71 G 4 F 0.75 kW 1380 rpm 220 / 380 V 3AC New, with documents !

PAGUS Bezel

• Manufacturer: Pagus

Bezel, lunette, setting stick, fixed PAGUS used, tested !

AS TECH bolt tensioning device

• Manufacturer: AS TECH

Bolt tensioning device AS TECH HWS Hand lever pump: HDP07001003 9158.22 Hydraulic nut: HWS16111131 9158.22.04 158 kN 700 bar approx. 2.0 m connection hose in metal case used, tested !

RÖHM Bezel

• Manufacturer: Röhm

Bezel, bezel, self-centering bezel RÖHM SLZP-52180 4-645-003-04

Bezel 350mm

Steady rest distance shoulder surface of the guideways: 530 mm used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Bezel, bezel, self-centering bezel PAGUS RMB 5 644 599 used !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TCA 280 x 3221 220 / 380 V 3AC Coolant pump: APOLLO 4 KSEY-25-002 02-008-85-017 Q = 1.6 m³/h H = 63.5 m Motor: MEZ 4AP90L-4 1....

SMW 3-jaw chuck

• Manufacturer: SMW

3-jaw chucks, three-jaw chucks, power chucks, wedge bar chucks SMW HFK 160-45 ( HFK165-45 ) Flange diameter: Ø 138 / 140 mm, length: 3 / 8 mm 3x bore ( continuous ): Ø 17 / 11 mm, length: 17 / 100 mm Thread wedge...

FORKARDT three-jaw chuck

• Manufacturer: FORKARDT

3-jaw chuck, three-jaw chuck, power chuck FORKARDT 3KTG 200 Bolt circle 1: Ø 150 mm, 6x M10 x 1.5, depth: 22 mm Bolt circle 2: Ø 135 mm, 3x Ø 12.5 / 24 mm, depth: 42 mm without jaws ! used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW used, tested ! External ø: 315 mm | Hole circle ø: 275 mm | Bore ø: 100 mm | Height with jaws: 115 mm | Dimensions: 320 x 320 x 120 mm

ORION vice

Vice ORION 125 used, tested ! Back wide: 125 mm | Back height: 80 mm | Span: 200 mm | Height above workbench: 160 mm | Dimensions: 440 x 220 ( 280 ) x 200 mm

ALLMATIC carrier jaw for gripper inserts

• Manufacturer: ALLMATIC

Carrier jaw for gripper inserts, mobile, pendulum ALLMATIC - JAKOB 2334/125 Including 2 cylinder screws DIN 912 M10x1.5 x 20 mm used, tested !

PAGUS pipe vice

• Manufacturer: Pagus

Pipe vice, round material vice PAGUS with stop, max 250 mm jaws rotatable ! used, tested ! very good condition !

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 used, tested !