Used Machine Tools in Aichi, Japan

Trusco Nakayama / Cabinets, Workbenches / Tool Racks

• Manufacturer: Trasco Nakayama

For BT50,. Holders: 40 pcs. Dimensions: (Width)750(Depth)620(Height)1500mm Number of sections: 8 In case of any discrepancy between the description and the actual product, the actual product shall take precedence.

Tools/Vices, Blocks, Clamps/Two-sided Angle Plates

Work surface dimensions: (W) 1000 x (H) 850mm Base dimensions: (W) 820 x (D) 800 x (T) 55mm Base mounting holes: M16, 640mm pitch Total height: 1065mm T-slots: 18mm x 6 (each side) *If there are any discrepancies...

JAM/Japan Automatic Machine AP100

• Manufacturer: JAM/Japan

Material: SKS,. Hardness: HRC60°,. Dimensions: (D)90*(W)90*(H)100㎜,,, Weight: 2.4kg Weight: 2.4kg In case of any discrepancy between the description and the actual product, the actual product shall take priority.

1996 Okamoto Machine Tool PFG-525

• Manufacturer: Okamoto
• Model: PFG-525

T:480*200mm,. Sine bar chuck, (OD)φ180-205*(W)10-20*(ID)φ31.75mm Grinding wheel: (OD)φ180-205*(W)10-20*(ID)φ31.75mm, All manual In case of any discrepancy between the description and the actual product, the actua...

2012 Okamoto Machine Tool PFG-500II

• Manufacturer: Okamoto
• Model: PFG-500

T:600*140mm,. Table travel: (left/right)540*(front/back)180mm, Grinding wheel: (OD)φ160*(W)6-32*(I.D.φ31.75) All manual In case of any discrepancy between the description and the actual product, the actual produc...

2002 Okamoto Machine Tools PSG-52DX

• Manufacturer: Okamoto
• Model: PSG-52

T: 550*200 Table travel: (left/right) 650*(front/back) 230mm Grinding wheel: (outer diameter) φ205*(width) 19*(inner diameter) φ50.8mm *If there are any discrepancies between the product description and the actua...

2007 Okamoto Machine Tool Works IGM-15NC

• Manufacturer: Okamoto
• Model: IGM-15NC

FANUC-18iTB, Grinding hole diameter: 6 to 150 mm dia. Grinding length: 125mm, Swing over table:φ600mm, Swing inside chuck cover:ø260mm, S:X170*Z500mm, Grinding wheel axis ~850rpm, 3-jaw chuck (GAMET 315MAC), Wate...

1992 Takara Kikai TK70

• Manufacturer: Treasure machine

*If there is a discrepancy between the description and the actual product, the actual product will take precedence.

unidentified 500□ unidentified

• Manufacturer: unidentified

500□

1980 Yamage MY-200D

• Manufacturer: Hillock

Max. ram stroke: 205mm, 22 to 91rpm, T:φ427mm, Table travel: (back/forth)435*(left/right)600mm If there is any discrepancy between the description and the actual product, the actual product will be given priority.

Nippon Automatic / JAM CC02 type

• Manufacturer: Nippon Automatic

Power supply: AC100V 50/60㎐, Rotation speed (50/60㎐): 2,810/3,380 In case of any discrepancy between the description and the actual product, the actual product will be given priority.

2018 Nihon Tokushu Kogyo NCR-1200NS

• Manufacturer: Japan Specialty Industry

Milling diameter: φ16-80mm (with 4-inch cutter), Milling length: 100-1200mm, Milling cutter diameter: 4 inches, Automatic door *If there are any discrepancies between the product description and the actual produc...

Kitagawa Iron Works PW-06SC

• Manufacturer: Kitagawa

Unused, Compensating specification, Jaw stroke diameter: 7.9 mm, Blank just stroke: 11.4 mm, Gripping range: (Outer diameter) Max. 120, Min. 13 mm, (Inner diameter) Max. 160, Min. 70 mm, Maximum rotation speed: 4...

Ojek KS09E

• Manufacturer: OJEC

Stock: 5 In case of any discrepancy between the description and the actual item, the actual item will be given priority.

Imperial Chuck / SOUL OPA-100SP

• Manufacturer: SOUL

※ If there is a difference between the description content and actual item, we will prioritize the actual item.