Used Drilling Rigs

2003 DRILTECH D55SP

• Manufacturer: Driltech

DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...

2005 ATLAS COPCO ROC D7-LM

• Manufacturer: Atlas-Copco
• Model: ROC D7 LM

3.5 – 4.5 Inch Class Long Mast 20′ FT Steel Cat Engine Unit is still in use. 2005 Atlas Copco ROC D7-11 LF These Photos were taken March 29th, 2016 when the unit had 5798 engine hours & 1494 percussion hours. The...

CYCLONE 36 DRILL RIG #2604T

3 line machine, gas deck engine, mounted on 1989 Ford F800 2WD truck with gas engine, 1 front, 2 rear, and 2 center hydraulic leveling jacks, tools Price: $47,500 - Ohio SANDERSON CYCLONE 36R COMBINATION ROTARY/S...

2001 INGERSOLL-RAND ECM680

• Manufacturer: Ingersoll Rand
• Model: ECM-680
• Horsepower: 260 horsepower
• Drilling depth: 30 meter

HCR-150 DRIFTER CUMMINS 6CTA8.3 AUTO ROD CHANGER BOOM SWING HOSE REEL AUTO DRILLING SYSTEM REAR MIRROR

2001 INGERSOLL-RAND CM682

• Manufacturer: Ingersoll Rand
• Model: CM-682

HCR-150 DRIFTER CUMMINS 6CTA8.3 AUTO ROD CHANGER BOOM SWING HOSE REEL AUTO DRILLING SYSTEM REAR MIRROR.

2012 ATLAS COPCO FLEXIROC D60

• Manufacturer: Atlas-Copco
• Model: FLEXIROC D60
• Horsepower: 474.72181945070787 horsepower
• Drilling depth: 55.5 meter

4 – 7 Inch DTH Class Cat C13 Tier 3 Diesel Engine High Pressure 858 CFM @ 363 PSI Air Compressor Total Hours – 7164 Single Section Boom System Aluminum Profile Feed Beam Hydraulic Operated DHR6H56-3 Rotary Head C...

1999 BAYSHORE 2T SPEED DRILL RIG #9519T

• Manufacturer: Bay Shore

Manufactured 1999, 24’ max depth, Mounted on 1999 International 4800 4 x 4 truck, PTO, 210 HP DT466E engine, Allison automatic transmission, 9000 hours, 59,000 miles, one owner/operator, 6 augers (12-25”) Price: ...

2021 Furukawa HCR1450-EDII

• Manufacturer: Furukawa
• Model: HCR1450EDII
• Horsepower: 260.15828523569866 horsepower
• Hours: 2,231 hour

2021 Furukawa HCR1450-EDII. 2231 Hours with 1068 Drifter Hours. HD828S Drifter. Currently set up for T514 Drill Steel. Available for inspection in Louisville, Ky.

2014 ATLAS COPCO FLEXIROC D60

• Manufacturer: Atlas-Copco
• Model: FLEXIROC D60
• Horsepower: 474.72181945070787 horsepower
• Drilling depth: 55.5 meter

DTH Class Cat C15 Tier 4 Final Diesel Engine Total Engine Hours 3917 4” Drill Pipe w/ 6” DTH Hammer Set up to handle 4” Drill Pipe x 16.5’ Ft Length Rotary Head hours: 2700 Condition: Used. No major issues. 2014 ...

2000 REEDRILL 400C

• Manufacturer: Reedrill

3.5” – 4.5” Inch Class CAT Diesel Engine Cab & Rod Changer – Hydraulic Drill 4600 total hours New Hydraulic Rotation Pump

CHICAGO PNEUMATIC T700 MAGNUM DRILL RIG #555Ti

• Manufacturer: Chicago Pneumatic

Built 1984, 1000/350 GHH compressor w/ Cummins KTA diesel engine, Detroit 60 Series 630 hp deck engine. The mast has been extended and the rig has been beefed up, 90,000 lb pullback, 20” table, mounted on Crane C...

2011 FURUKAWA DCR20

• Manufacturer: Furukawa
• Model: DCR20
• Horsepower: 439.8552451407689 horsepower
• Machine weight: 20,100 kilogram

3.5 – 6.5 Inch Class CAT C-13 Tier III Engine 3 Drill Pipe Estimated 6000 Total Hours with less than 500 hours on out of Frame Rebuild by CAT with warranty Angle Indicator

2005 CATERPILLAR MD5090

• Manufacturer: Caterpillar
• Model: MD5090

3.5 – 4.5 Inch Class HPR1H-ATW Hammer CAT C9 Diesel Engine Low Hours Set up for T45 and long feed for 20′ drill steel Excellent Condition

2006 SOOSAN SD1000E

• Manufacturer: Soosan

3.5 – 4.5 Inch Class SP-3 Drifter Cummins 5.9L Diesel – Installed New w/ Only 438 Hours Enclosed Cab w/ AC Extendable Boom Rod Changer Unit Running T45 Drill Steel

2013 ATLAS COPCO FLEXIROC T45

• Manufacturer: Atlas-Copco
• Model: FLEXIROC T45
• Horsepower: 225 horsepower

3.5 – 4.5 Inch Class CAT C9.3, TIER 4 ENGINE COP2560 Drifter Toe-Hill Drilling System Dust Collection System Double Hose Drum Carousel Type Rod Handling System Water Mist System 5101 Engine hours 1953 Percussion ...

Ingersoll Rand CM-672 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: CM-672

Good condition Ingersoll Rand CM-672 Drilling Rigs manufactured in 1999. Located in USA and other countries. Click request price for more information.