Used Bending & Forming

DAHLSTROM 400-10

• Manufacturer: Dahlstrom
• Model: 400-10

SPECIFICATIONS: FEATURES: 10 STAND ROLLFORMER ARBOR DIAMETER - 2" VERTICAL CENTERS - 4" TO 7" ROLL SPACE - 28" HORIZONTAL SPACING - 13" SPEED - 90 FPM POSSIBLY ROOM FOR 4 ADDITIONAL STANDS

2015 TAURING ALPHA-200CNCI #0744422

• Manufacturer: Tauring

Tauring Alpha 200CNC Angle Bending Roll (2015) Specifications (Preliminary) Round Tube: 10.75" x 0.5" / Min. Radius: 87" Square Tube: 10" x 10" x .40" / Min. Radius: 80" Flat Bar (Hard Way): 10" x 2.3 / Min. Radi...

4" X 4" X 5/8" BUFFALO ANGLE ROLL Z24054

• Manufacturer: Buffalo

ANGLE LEG OUT 4" X 4" X 5/8" MINIMUM DIAMETER 40" ANGLE LEG IN 3.5" X 3-3/13" X 5/8" MINIMUM DIAMETER 48" FLAT ON FLAT 9" X 1.25" X 30" SQUARE 2.5" 30" DIAMETER STANDARD PIPE 3.5" BEAMS ON FLANGE 8" X 18# X 60" D...

DAVI / Promau 16-inch Diameter CNC Plate Rolling/Bending Machine Model: MCB 3045

• Manufacturer: Davi
• Model: MCB 3045

Unit is USED. This unit was not used in a very high production environment. Unit is shown before it was professionally moved to our warehouse. Overall this unit is in very good condition. The unit does show some ...

COMET ANGLE ROLL MACHINE. #0777425

• Manufacturer: Comet

5' X .220 Roundo Plate Roll Z23020

• Manufacturer: Roundo

5' Maximum Width 7/32 Thickness Capacity 8.07" Diameter Top And Bottom Roll 6.29" Diameter Side Rolls Hydraulic Drop End Hydraulically Driven Pre Bending Capacity 59.0" x .256 Rolling Capacity 59.0 x .433 1991 4 ...

Vevor RB-25 Rebar Bender w/ Metal Case

• Manufacturer: Vevor

10' X 1.5" SERTOM RIMI 3016 3 ROLL HYDRAULIC DOUBLE INITIAL PINCH PLATE ROLL. #1058920

• Manufacturer: Sertom

DIMENSIONS: DIMENSIONS ARE MACHINE ASSEMBLED MANUAL AVAILABLE.

IMCAR 4RH 30/7 #1156422

• Manufacturer: Imcar
• Model: 4RH 307

Capacity: 1" | Pre bend capacity: 13/16" | Roll length: 144" | Center roll diameter: 18.1" | Lateral roll diameter: 16.1" | # of rolls: 4 | Hp: 30 | Weight: 33 TON

HELLER S1550-5 #0134425

• Manufacturer: Heller

7.1" Maximum thickness: 1/4" | Maximum length: 5' | Top roll: 6.7" | Bottom rolls: 6.7" | Drive motor horsepower: 5-1/2 | Forming horsepower: 2 | Equipped with: FOOT PEDAL CONTROLS

Fenn #20 Hydraulic Tube End Former #0102517

• Manufacturer: Fenn

MACHINE SPECIFICATIONS: Aluminum Low Carbon Steel Stainless Steel Beading: 2" x .095" (50.8 mm x 2.41 mm) 1-3/8" x .072" (34.9 mm x 1.82 mm) 1" x .065" (25.4 mm x 1.65 mm) Reducing: 2-1/2" x .109" (63.5 mm x 2.76...