Used leipzig

1995 Schröder Ducter 1500

• Manufacturer: Schroeder
• Power requirement: 2 kW

CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation...

1970 straightening machine DDR BETRIEB nicht bekannt

• Manufacturer: DDR BETRIEB
• Power requirement: 1.2 kW

straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D.

1982 PEDDINGHAUS Perfefekt 55KA/PA/PLA

• Manufacturer: Peddinghaus

Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. T...

Feed units VG 400

Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described.

2006 Schilt Engineering BV SBC 60 SP (PLC)

• Manufacturer: Schilt Engineering BV

Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control...

1988 WMW -

• Manufacturer: WMW
• Power requirement: 0.25 kW

-application: bending of beads / flanging -shaft distance max./min.: 65 / 52mm manually adjustable via handwheel -currently beading tool Ø 8mm built in -stop plate 130mm adjustable operation at the control box an...

1980 NICHT BEKANNT 23N/8

• Manufacturer: NICHT BEKANNT

Punching Press Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Punching cross section in mm²: 45 kp/mm² | Table-size: 120x100 mm | Throat: 80 mm | Weight...

1990 ANTRIM HYDRAULICS Embosing Press

• Manufacturer: ANTRIM HYDRAULICS
• Power requirement: 12 kW

Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x3...

1986 VEB ELEKTROTECH.GERAETE 4 F - 6150

• Manufacturer: VEB ELEKTROTECH.GERAETE
• Power requirement: 1.5 kW

Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/...

1993 TRANSFLUID DB618

• Manufacturer: Transfluid

Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single...

Bar Stock Shearing Machines PEDDINGHAUS

• Manufacturer: Peddinghaus

Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 2 | Throat: mm | Number of strokes: Hub/min | Height of stroke: mm | Sheet thickness - max.: mm | Round bar ...

1995 SAMCO CTH-201

• Manufacturer: Samco
• Power requirement: 5 kW

Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec...

EOC nicht bekannt

• Manufacturer: EOC
• Power requirement: 0.55 kW

HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stain...

WMW WBB 2300

• Manufacturer: WMW
• Power requirement: 9 kW

Steel frame double T beam welded top roller: with running; adjustment= length 150mm via hand toggle; support block can be folded out for opening side rollers: motor driven; adjustment=fixed

1991 MUHR & BENDER (MUBEA) B0 32

• Manufacturer: Mubea

-Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories!