Used Sheet Metal Processing in Switzerland

2002 MIOS T20 FV

• Manufacturer: Mios

Object: 53991 | Spigot hole diameter: 30mm | Stroke rate (max.): 155/min | Stroke min.: 5mm | Stroke max.: 60mm | Shut height (stroke down, adjustment up), bdc: 280mm | Throat (c-frame): 180mm | Total power cons...

BUCH DCMC-200-4/40-P-25

• Manufacturer: BUCH

Object: 43430

1980 RASKIN 2016 ST

• Manufacturer: Raskin

Strip unwinder LASA AH-32 R Straightener LASA HDC-32-11 R/CDL GPA ANM 500x300 gripper feeder VOLTAGE 220V - TRAFO 380V available Press can be inspected under power

SCHULER S2-160-1.25-30-160

• Manufacturer: Schuler

Object: 49505 | Number of slide actions: 1 | Total force (nominal): 160to | Table surface (left-right): 1130mm | Table surface (front-back): 1000mm | Stroke: 160mm | Stroke rate (max.): 90/min | Slide adjustment...

SCHULER PH 200/1

• Manufacturer: Schuler

Object: 48524 | Number of slide actions: 1 | Total force (nominal): 200to | Table surface (left-right): 1000mm | Distance table - slide max.: 1540mm | Space requirements -left/right-: 1700mm | Space requirements...

1972 KAISER 60 P

• Manufacturer: Kaiser

Object: 42789 | Total force (nominal): 60to | Slide adjustment: 70mm | Stroke min.: 11mm | Stroke max.: 60mm | Stroke rate (min.): 60/min | Stroke rate (max.): 240/min

STRIP STRAIGHTENING MACHINE “HFA” TYPE JMS-100

SKU: 2200038

1978 FEINTOOL GKP F 250

• Manufacturer: FEINTOOL

Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...

1978 FEINTOOL GKP F 250

• Manufacturer: FEINTOOL

Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...

2002 FEINTOOL HFA 8800 PLUS

• Manufacturer: FEINTOOL

Object: 36813 | Total force (nominal): 880to | Stroke: 40mm | Cutting velocity min.: 5mm/s | Cutting velocity max.: 70mm/s | Closing velocity: 200mm/s | Returning velocity: 200mm/s | Nominal force: 60kN | Lower ...

1981 FEINTOOL GKP F 40

• Manufacturer: FEINTOOL

Object: 32359 | Total force (nominal): 40to | Stroke: 45mm | Stroke rate (max.): 90/min | Lower table (left-right): 280mm | Lower table (front-back): 280mm | Upper table (left-right): 280mm | Upper table (front-...

1971 FEINTOOL GKP F 50/80

• Manufacturer: FEINTOOL

Example of an overhauled Feintool GKP 50/80 which can be applied to a machine we have in stock

2007 FEINTOOL (SCHMID) HSR 1000 ECO

• Manufacturer: Schmid

SIEMENS S7 300 controls Control Panel SIEMENS Panel PC 477B Switch on hours acc. to counter : 62'000 h Total strokes acc. to counter: 3 Mio including Coil line SCHMID HR 12

1972 FEINTOOL GKP F 100/160

• Manufacturer: FEINTOOL

Object: 49648 | Total force (nominal): 160to | Stroke: 13mm | Stroke rate (max.): 72/min | Nominal force: 50to | Lower table (left-right): 470mm | Lower table (front-back): 470mm | Upper table (left-right): 500m...

1987 PLATARG 912

• Manufacturer: PLATARG

Standard Flat Plate Lifter Cams 13 Stations, 12 Rams + 1 Slave 6.50" (165 mm) long Stroke - checked and confirmed 3.11" (79mm) depth of draw Wedge Adjustable Rams with Standard Male Thread Tool Holders Platarg st...