Machine Tools » Sheet Metal Processing » Switzerland

Search By Manufacturer

Search By Canton

Building Filters

47

Used controllers in Switzerland

  • Trusted Seller
    2016 SCHMIDT EP 343 Ref

    2016 SCHMIDT EP 343 Ref No: 52947

    • Manufacturer: Schmidt

    Object: 52947 | Controls: SCHMIDT | Total force (nominal): 0.25 to | Table surface (left-right): 180 mm | Table surface (front-back): 150 mm | Slide force: 0.25 to | Stroke: 100 mm | Mains voltage: 400 V |...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1991 FEINTOOL MFA 2500 Ref

    1991 FEINTOOL MFA 2500 Ref No: 40452

    • Manufacturer: FEINTOOL

    + Control system completely renewed in 2015 Object: 40452 | Last overhaul: 2015 | Controls: BECKHOFF | Drive system: knuckle-joint | Feedstock transport direction: left to right | Total force (nominal): 250 to |...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2025 PLATARG 312 HS Ref

    2025 PLATARG 312 HS Ref No: 48610

    • Manufacturer: PLATARG

    Object: 48610 | Controls: BECKHOFF | Number of slide actions: 13 | Slide force: 3 to | Stroke: 60 mm | Stroke rate (max.): 210 /min | Slide adjustment: 6 mm | Variable speed: yes | Stroke rate (min.): 70 /m...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1999 KOHLER 50.140/21-3000.1VSRM + HK

    1999 KOHLER 50.140/21-3000.1VSRM + HK Ref No: 46805

    • Manufacturer: Kohler

    KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1999 SCHMID HSR500 Ref No:

    1999 SCHMID HSR500 Ref No: 47620

    • Manufacturer: Schmid

    Press is equipped with 4. force Straightener SCHMID Loop control GSW SCHWALBE new in 2016

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    FEINTOOL GKP 250 Ref No:

    FEINTOOL GKP 250 Ref No: 38885

    • Manufacturer: FEINTOOL

    Complete refurbished fineblanking press: * disassembly into individual parts * findings of all components (crack test) * overhaul of the drive * overhaul of the guides * overhaul of the impression cylinders * ove...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 ARKU RM 50X/9 ECOPLAN

    2005 ARKU RM 50X/9 ECOPLAN Ref No: 46236

    • Manufacturer: Arku

    Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 FEINTOOL MFA 1600 Ref

    2003 FEINTOOL MFA 1600 Ref No: 42972

    • Manufacturer: FEINTOOL

    !! very well maintained machine !!! 2016 Overhaul by Feintool: + knuckle joint replaced + ram guides and roller shoe replaced + new base and table plate + new v-ring, counterholder and touch table piston + new ba...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1971 FEINTOOL GKP F 50/80

    1971 FEINTOOL GKP F 50/80 Ref No: 36213

    • Manufacturer: FEINTOOL

    Example of an overhauled Feintool GKP 50/80 which can be applied to a machine we have in stock

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1989 ARKU RM 5035.4/21 Ref

    1989 ARKU RM 5035.4/21 Ref No: 42744

    • Manufacturer: Arku

    Line consisting of + Uncoiler ARKU AH4000/MSG-4Q + insert attachment ARKU + precision leveller ARKU RM 5035 4/21 + band loop ARKU levelling capacity according to diagram

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1970 FEINTOOL GKP F 100/160

    1970 FEINTOOL GKP F 100/160 Ref No: 38727

    • Manufacturer: FEINTOOL

    The press can currently not be inspected in operation Reconstruction of the complete mechanical system and the hydraulic system. New electrical panel. Servomotor in the feeder. All in 2017.

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1999 LOIRE SAFE EDIM 350-150/16-14/14-12

    1999 LOIRE SAFE EDIM 350-150/16-14/14-12 Ref No: 41754

    • Manufacturer: Loire Safe

    Object: 41754 | Controls: SIEMENS S5 95U | Drive system: hydraulic | Openings in uprights: yes | Total force (nominal): 350 to | Table surface (left-right): 1600 mm | Table surface (front-back): 1400 mm | Str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 NEFF DP 800 Ref

    2003 NEFF DP 800 Ref No: 46230

    • Manufacturer: Neff

    Complete hot forming line consisting of: * Hydraulic press NEFF 800 to. * Ruhstrat furnace system: - Natural gas heating - Temperature 930°C - max. lining width: 1850 mm - Furnace length: 10800 mm * Strothmann Fe...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    PLATARG 611 Ref No: 40001

    PLATARG 611 Ref No: 40001

    • Manufacturer: PLATARG

    Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm Maximum speed: 80 spm Example of an overhaule...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2007 FEINTOOL (SCHMID) HSR 1000

    2007 FEINTOOL (SCHMID) HSR 1000 ECO Ref No: 49997

    • Manufacturer: Schmid

    SIEMENS S7 300 controls Control Panel SIEMENS Panel PC 477B Switch on hours acc. to counter : 62'000 h Total strokes acc. to counter: 3 Mio including Coil line SCHMID HR 12

    Niederhelfenschwil, Switzerland
1234

Overview

Sheet metal processing involves the cutting, bending, and assembling of sheet metal to create different products and structures. This category includes machinery such as presses, shears, lasers, and CNC machines, all designed to handle various types of metal sheets for industries like automotive, aerospace, and construction.

FAQ

What should I consider when buying used sheet metal processing equipment?

Check the machine's age, condition, and maintenance history. Verify its compatibility with your specific metal types and thicknesses, as well as its operational accuracy and efficiency.

How can I ensure safe shipping of sheet metal processing equipment?

Hire a specialized heavy machinery transport service. Ensure the equipment is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for sheet metal processing equipment?

Regular maintenance includes inspecting and lubricating moving parts, checking electrical systems, and cleaning to prevent dust buildup. Refer to the manufacturer's manual for specific maintenance intervals and procedures.