Machine Tools » Sheet Metal Processing » Switzerland

Building Filters

111

Used Sheet Metal Processing in Switzerland

  • Trusted Seller
    2003 FEINTOOL MFA 1600 Ref

    2003 FEINTOOL MFA 1600 Ref No: 42972

    • Manufacturer: FEINTOOL

    !! very well maintained machine !!! 2016 Overhaul by Feintool: + knuckle joint replaced + ram guides and roller shoe replaced + new base and table plate + new v-ring, counterholder and touch table piston + new ba...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1991 FEINTOOL MFA 2500 Ref

    1991 FEINTOOL MFA 2500 Ref No: 40452

    • Manufacturer: FEINTOOL

    + Control system completely renewed in 2015 Object: 40452 | Last overhaul: 2015 | Controls: BECKHOFF | Drive system: knuckle-joint | Feedstock transport direction: left to right | Total force (nominal): 250 to |...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1988 PLATARG 912 Ref No:

    1988 PLATARG 912 Ref No: 50350

    • Manufacturer: PLATARG

    1 station from 336º to 242º stroke 77 mm 2 station from 278º to 110º stroke 111 mm 3 station from 284º to 110º stroke 124 mm 4-12 station from 284º to 110º stroke 154 mm Shell height max 154/2 = 77 mm Ejector str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1999 KOHLER 50.140/21-3000.1VSRM + HK

    1999 KOHLER 50.140/21-3000.1VSRM + HK Ref No: 46805

    • Manufacturer: Kohler

    KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2021 SACFORM RMS11-604 Ref No:

    2021 SACFORM RMS11-604 Ref No: 42826

    • Manufacturer: SACFORM

    Object: 42826 | Controls: SCHNEIDER | Sheet width max.: 600 mm | Sheet thickness max.: 4 mm | Feed velocity max.: 32 m/min | Feedstock transport direction: left to right | Sheet width (min): 60 mm | Sheet th...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2006 BURKHARDT HK 160L/SO Ref

    2006 BURKHARDT HK 160L/SO Ref No: 56416

    • Manufacturer: Burkhardt

    Object: 56416 | Controls: SIEMENS SIMATIC | Drive system: eccentric / crank | Total force (nominal): 160 to | Table surface (left-right): 1200 mm | Table surface (front-back): 970 mm | Stroke rate (max.): 90 ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2000 DELTECO PE-63 Ref No:

    2000 DELTECO PE-63 Ref No: 55885

    • Manufacturer: DELTECO

    Object: 55885 | Drive system: eccentric / crank | Table cushion: yes | Total force (nominal): 63 to | Nominal work capacity: 630 kNm | Table surface (left-right): 450 mm | Table surface (front-back): 310 mm ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1999 DELTECO PE-100 Ref No:

    1999 DELTECO PE-100 Ref No: 55884

    • Manufacturer: DELTECO

    Object: 55884 | Drive system: eccentric / crank | Table cushion: yes | Total force (nominal): 100 to | Nominal work capacity: 1000 kNm | Table surface (left-right): 640 mm | Table surface (front-back): 420 m...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1967 WEINGARTEN ARS 100 Ref

    1967 WEINGARTEN ARS 100 Ref No: 47690

    • Manufacturer: Weingarten
    • Model: ARS 100

    for safe tools only Object: 47690 | Drive system: eccentric / crank | Frame design: C-frame, single sided | Total force (nominal): 100 to | Slide force: 100 to | Stroke rate (max.): 72 /min | Slide adjustment:...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 ROSS 80R4 Ref No:

    2003 ROSS 80R4 Ref No: 55280

    • Manufacturer: Ross

    Object: 55280 | Drive system: eccentric / crank | Total force (nominal): 80 to | Table surface (left-right): 570 mm | Table surface (front-back): 390 mm | Thickness of bolster plate: 70 mm | Opening in bed (...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1997 SANGIACOMO T 15 CE

    1997 SANGIACOMO T 15 CE Ref No: 55256

    • Manufacturer: San Giacomo
    • Model: T 15 CE

    Object: 55256 | Drive system: eccentric / crank | Total force (nominal): 15 to | Table surface (left-right): 360 mm | Table surface (front-back): 260 mm | Stroke rate (max.): 165 /min | Slide adjustment: 40 ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1996 IMS 80 RE Ref

    1996 IMS 80 RE Ref No: 53951

    • Manufacturer: IMS
    • Model: 80 RE

    Object: 53951 | Drive system: eccentric / crank | Total force (nominal): 80 to | Table surface (left-right): 560 mm | Table surface (front-back): 376 mm | Spigot hole diameter: 50 mm | Stroke: 110 mm | Stro...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1998 ESNA RFS/PN125 Ref No:

    1998 ESNA RFS/PN125 Ref No: 50613

    • Manufacturer: ESNA

    Located in Barcelona - Spain Object: 50613 | Drive system: eccentric / crank | Total force (nominal): 125 to | Nominal work capacity: 1250 kNm | Table surface (left-right): 750 mm | Table surface (front-back):...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    GRESSEL HB 20-8

    GRESSEL HB 20-8

    • Manufacturer: Gressel

    Bending angle max: 180 Grad | Bending height max: 100 mm | Clamping range: 40 mm | Length x width x height: 420x270x210 mm | Weight approx: 45 Kg

    Beringen, Switzerland
  • Trusted Seller
    2015 Bystronic Fiber 4020 6KW

    2015 Bystronic Fiber 4020 6KW

    • Manufacturer: Bystronic

    This Bystronic Fiber 4020 6KW was manufactured in 2015. It features a tool changer for sheet metal formats up to 2030 mm x 4030 mm and a 6kW fiber laser. The operator terminal is equipped with a touchscreen, USB ...

    Switzerland
34567

Overview

Sheet metal processing involves the cutting, bending, and assembling of sheet metal to create different products and structures. This category includes machinery such as presses, shears, lasers, and CNC machines, all designed to handle various types of metal sheets for industries like automotive, aerospace, and construction.

FAQ

What should I consider when buying used sheet metal processing equipment?

Check the machine's age, condition, and maintenance history. Verify its compatibility with your specific metal types and thicknesses, as well as its operational accuracy and efficiency.

How can I ensure safe shipping of sheet metal processing equipment?

Hire a specialized heavy machinery transport service. Ensure the equipment is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for sheet metal processing equipment?

Regular maintenance includes inspecting and lubricating moving parts, checking electrical systems, and cleaning to prevent dust buildup. Refer to the manufacturer's manual for specific maintenance intervals and procedures.