Used Sheet Metal Processing in Switzerland

Best Brands sheet metal machines in Switzerland

• Manufacturer: Best Brands

see Attach. at the bottom - Beyeler/Bystronic - COLGAR - Finn-/Prima-Power - Gasparini - LVD - Salvagnini - Schiavi - Trumpf ..... Floreani & Partners +39 393 577 2205 Alex/mob. alex.groupmarketing@gmail.com

2010 PLASMATOME 20 MPC Ref No: 51131

• Manufacturer: PLASMATOME

The plasma is in operation, if anyone wants to see it there would be no problem to make an appointment. Expected dismantling date, second half of July 2025

1980 RASKIN 2016 ST Ref No: 47801

• Manufacturer: Raskin

Strip unwinder LASA AH-32 R Straightener LASA HDC-32-11 R/CDL GPA ANM 500x300 gripper feeder VOLTAGE 220V - TRAFO 380V available Press can be inspected under power

2003 NEFF DP 800 Ref No: 46230

• Manufacturer: Neff

Complete hot forming line consisting of: * Hydraulic press NEFF 800 to. * Ruhstrat furnace system: - Natural gas heating - Temperature 930°C - max. lining width: 1850 mm - Furnace length: 10800 mm * Strothmann Fe...

SCHULER PH 200/1 Ref No: 48524

• Manufacturer: Schuler

Object: 48524 | Drive system: hydraulic | Openings in uprights: no | Number of slide actions: 1 | Table cushion: yes | Total force (nominal): 200 to | Table surface (left-right): 1000 mm | Distance table - sli...

1972 KAISER 60 P Ref No: 42789

• Manufacturer: Kaiser

Object: 42789 | Total force (nominal): 60 to | Slide adjustment: 70 mm | Stroke min.: 11 mm | Stroke max.: 60 mm | Variable speed: yes | Stroke rate (min.): 60 /min | Stroke rate (max.): 240 /min | Strip f...

STRIP STRAIGHTENING MACHINE “HFA” TYPE JMS-100

SKU: 2200038

1983 SMT MV20 BL5022 Ref No: 42997

• Manufacturer: SMT

Maximum wall thicknesses: Material up to approx. 450 N/mm² max. 22mm (steel) Material up to approx. 750 N/mm² max. 17.5mm (stainless steel) Maximum diameter : dished end approx. 5000 mm Basket arch bottom approx....

1978 FEINTOOL GKP F 250 Ref No: 48186

• Manufacturer: FEINTOOL

Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...

2002 FEINTOOL HFA 8800 PLUS Ref No: 36813

• Manufacturer: FEINTOOL

Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Returning velocity: 200 mm/s | Nominal force: 6...

1981 FEINTOOL GKP F 40 Ref No: 32359

• Manufacturer: FEINTOOL

Object: 32359 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 40 to | Stroke: 45 mm | Stroke rate (max.): 90 /min | Lower table (left-right): 280 mm | Lower table (f...

1971 FEINTOOL GKP F 50/80 Ref No: 36213

• Manufacturer: FEINTOOL

Example of an overhauled Feintool GKP 50/80 which can be applied to a machine we have in stock

1972 FEINTOOL GKP F 100/160 Ref No: 49648

• Manufacturer: FEINTOOL

Object: 49648 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 160 to | Stroke: 13 mm | Stroke rate (max.): 72 /min | Nominal force: 50 to | Lower table (left-right):...

2007 FEINTOOL (SCHMID) HSR 1000 ECO Ref No: 49997

• Manufacturer: Schmid

SIEMENS S7 300 controls Control Panel SIEMENS Panel PC 477B Switch on hours acc. to counter : 62'000 h Total strokes acc. to counter: 3 Mio including Coil line SCHMID HR 12

1987 FEINTOOL HFA 320 Ref No: 42362

• Manufacturer: FEINTOOL

Object: 42362 | Last overhaul: 2019 | Drive system: hydraulic | Total force (nominal): 320 to | Stroke: 30 mm | Stroke rate (max.): 80 /min | Nominal force: 160 to | Lower table (left-right): 630 mm | Lower...