Used processing

Heat Shrink Tunnel

• Manufacturer: Belco Packaging Systems Inc

Heat Shrink Tunnel Used Belco Packaging Systems Inc. ST 1608 Heat Shrink Tunnel. 240V, 1-Ph, 50-60Hz. SN #10123

Eastey Heat Shrink Tunnel - Model Et1610-30

• Manufacturer: Eastey

ITEM #: 07064 Used Eastey Heat Shrink Tunnel - Model Et1610-30 Manufactured by jeff eastey inc. Model et1610-30. S/N 0111610tl. 220 volt. 60 hz. 40 amps. Single phase. 500 lbs. Built 8/1997. On casters. 30" W x 3...

OAL FIRO/RE-6/9/3 6-6L SHRINK HEAT TUNNEL

Used OAL FIRO/RE-6/9/3 6-6L shrink tunnel in good condition. Ideal for efficient packaging operations. Compact design suits various industrial applications.

OAL FIRO/RE-6/9/24-6L HEAT SHRINK TUNNEL NO STAND

OAL Shrink Tunnel, Model FIRO/RE-6/9/24-6L, in used condition, offers reliable performance for shrink packaging needs. Ideal for enhancing production efficiency in industrial settings.

Shrink Tunnel - # 4037

- MFG UltraSource Built in 2008 - Serial #: 1071 - Model #: US - 2818 - Stainless steel construction - Video below - Control panel: On/Off, Cycle Push, Temp Gauge - (2) Elements max temp. 220°F - Nord Motor gearb...

Shrink Tunnel - # 4034

- Video below - Stainless steel construction - Eujo Motor - 240 Volts, 12A, 3 Phase - Serial #: REO44662 - Model #: RET-2 - (4) 4" Swivel casters (2) locks broken - (8) Heating elements approximately temp 120°C -...

2021 Polypack ILB-24 Shrink Bundler

• Manufacturer: Polypack

POLYPACK Inc. ILB-24 Shrink Bundler, Unit was at a Research and Development facility where new items were tested for production, unit was tested no problems just pulled for a different setup. These are very versa...

Charles Beseler 2014-MB / T-14-8-D

• Manufacturer: Beseler
• Model: T-14-8

CHARLES BESELER 2014-MB / T-14-8-D SHRINK WRAPPER Charles Beseler 2014-MB L-Sealer w/ T-14-8-D Heat Tunnel EQUIPPED WITH: Charles Beseler 2014-MB L-Sealer Charles Beseler T-14-8-D Heat Tunnel

SPM Shrink Sleeve Applicator, Model MPI-400

• Manufacturer: Solid Precision Machinery

SPM Shrink Sleeve Applicator, Model MPI-400 Used SPM vertical shrink sleeve applicator, model NSV-400-UG, speeds up to 400 bottles/minute, 50mm - 105mm bottle diameter range, 80mm - 160mm lay flat, 50mm - 200mm l...

Omega Dual Lane Shrink Bundler, Model DL-27

• Manufacturer: Omega

Omega Dual Lane Shrink Bundler, Model DL-27 Used Omega shrinkbundler, model DL-27, speeds up to 26 bundles/minute or 150 containers/minute, package size capabilities 2 X 1 X 3, 6 X 1 X 1 and 3 X 1 X 1, bundle des...

Omega Dual Lane Shrink Bundler, Model DL-27

• Manufacturer: Omega

Omega Dual Lane Shrink Bundler, Model DL-27 Used Omega shrink bundler, model DL 27, dual lane, approximately 13-37 bundles/minute, machine speed 60-150 containers/minute, package size capabilities 4x3x1, 3x4x1, 3...

6" x 60" Heat Shrink Tunnel

6" x 60" Heat Shrink Tunnel Used Heat shrink wrap tunnel, 60" long x 6" wide heated area, manual height adjustment, with controls, 1 hp 220/380 volt blower.

VC999 TR2 - Dryer

• Manufacturer: VC999

TheTR2 dryer is a fully automatic in-line dryer tunnel. The TR2 takes wet products a from a shrink tank, and dries them for immediate labeling or cardboard packaging using air blades. It does not require compres...

VC999 ST2 - Shrink Tunnel

• Manufacturer: VC999

The ST2 package shrink tunnel is a fully automatic in-line spray tunnel. A hot water cascade is used to shrink the packaging. The continuous throughput enables cost-effective shrinking of large production volumes...