Used Machine Tools in Aichi, Japan

General machine tools / general-purpose machines / Oil washing machines

※ If there is a difference between the description content and actual item, we will prioritize the actual item.

Machine Tool Peripherals/Others/Workpiece Gripper

Chuck: 8 inches If there is any discrepancy between the description and the actual product, the actual product will be given priority.

unidentified BT40 Tool

• Manufacturer: unidentified

BT40, Tool 25

EROWA Tools/ Tools/Manual Clamp Chucks

• Manufacturer: Erowa

Chuck outer diameter: Φ80 mm If there is any discrepancy between the description and the actual product, the actual product will be given priority.

Tools/ Tools/V-groove square block

300 x 300 x 300mm If there is any discrepancy between the description and the actual product, the actual product will be given priority.

EROWA Tools/ Tools/Manual Clamp Chuck with Block

• Manufacturer: Erowa

Chuck outer diameter: Φ80 mm,. Block dimensions: 80 x 80 x 80 mm In case of any discrepancy between the description and the actual product, the actual product will be given priority.

BIG DAISHOWA BBT40 Tool

• Manufacturer: Daishowa

BBT40, 17 bottles

NIKKEN BT50-SLO-25-150 Tool

• Manufacturer: Nikken

Side through

Trusco Nakayama / Cabinets, Workbenches / Tool Racks

• Manufacturer: Trasco Nakayama

For BT50,. Holders: 40 pcs. Dimensions: (Width)750(Depth)620(Height)1500mm Number of sections: 8 In case of any discrepancy between the description and the actual product, the actual product shall take precedence.

Tools/Vices, Blocks, Clamps/Two-sided Angle Plates

Work surface dimensions: (W) 1000 x (H) 850mm Base dimensions: (W) 820 x (D) 800 x (T) 55mm Base mounting holes: M16, 640mm pitch Total height: 1065mm T-slots: 18mm x 6 (each side) *If there are any discrepancies...

JAM/Japan Automatic Machine AP100

• Manufacturer: JAM/Japan

Material: SKS,. Hardness: HRC60°,. Dimensions: (D)90*(W)90*(H)100㎜,,, Weight: 2.4kg Weight: 2.4kg In case of any discrepancy between the description and the actual product, the actual product shall take priority.

JAM/Japan Automatic Machine TDP150

• Manufacturer: JAM/Japan

Width of the clip: 120 mm, Width of the clip opening: 150 mm, Width of the clip opening: 150 mm Opening width: 150mm, Tilt: 45°, Tilt: 45°, Tilt: 45°, Tilt: 45°, Tilt: 45 Tilt: 45°, Swivel: 360 Swivel: 360°, Tilt...

Takeda Machine TK-100HVI

• Manufacturer: Takeda

Width: 104 mm, Height: 36 mm, Mouthpiece height: 36 mm, Mouthpiece width: 104 mm Height of the mouthpiece: 36 mm,, Maximum opening width of the mouthpiece: 0 to 170 mm Max. opening width: 0 to 170 mm, Max. angle:...

1996 Okamoto Machine Tool PFG-525

• Manufacturer: Okamoto
• Model: PFG-525

T:480*200mm,. Sine bar chuck, (OD)φ180-205*(W)10-20*(ID)φ31.75mm Grinding wheel: (OD)φ180-205*(W)10-20*(ID)φ31.75mm, All manual In case of any discrepancy between the description and the actual product, the actua...