Used Gearboxes & Transmissions in British Columbia, Canada

220mm Shaft Coupling – Gearboxes Shafts & Accessories –

• Manufacturer: LENMARK INDUSTRIES

Outer diameter: 20in.

SURPLUS NEW RADICON No 10 Gear Reducer 38-1 – Gearboxes Gearboxes – 38-1 , 2.25 , 3.5

• Manufacturer: Radicon

Ratio: 38-1 | Input shaft size: 2.25 | Output shaft size: 3.5

72-0-7.5 14.4:1 Ratio Gear Reducer – Gearboxes Gearboxes – 14.4:1 , 1.1" , 2.4"

• Manufacturer: LENMARK INDUSTRIES

Model Model 72-0-7.5 General Specifications Ratio: 14.4:1 HP Rating: 7.5 hp Shaft Size (IN): 1.1" Shaft Size (OUT): 2.4" Other Specifications Output: 125 Additional Information S/N: 8211613001

SURPLUS NEW DESCH 50.37:1 Ratio Gear Reducer 43959 – Gearboxes Gearboxes – 50.37:1 , 1.5" , Planetary

• Manufacturer: DESCH

Ratio: 50.37:1 | Input shaft size: 1.5"

Blowback Damper 4 x 1 – Gearboxes Shafts & Accessories

• Manufacturer: LENMARK INDUSTRIES

USED–LIKE NEW SEW-EURODRIVE Gear Reducer 40.59:1 Ratio Type R103A – Gearboxes Gearboxes – 40.59:1

• Manufacturer: SEW-Eurodrive

Ratio: 40.59:1 | Torque: 35400 lb/in

SURPLUS NEW SEW-EURODRIVE 6.39:1 Ratio Gear Reducer Type KA127 R87 AM213/215 Type RF87/A – Gearboxes Gearboxes – 6.39:1

• Manufacturer: SEW-Eurodrive

Ratio: 6.39:1 Ratio: 6.39:1 | Rpm: 1750/8.8 RPM | Torque: 12000 Nm

3-7/8" Split Taper Bushing U1314 – Gearboxes Shafts & Accessories

• Manufacturer: LENMARK INDUSTRIES

Inside diameter: 3-7/8" | Keyway size: 1" x 1/2" | Cap screws size: 5/8" x 2-3/4" | Bushing size: U1 | Length through bore: 7.125" | Flange outside diameter: 8.38" | Barrel diameter small end: 5.65" | Barrel dia...

SURPLUS NEW SIEMENS Flender Zapex Torsionally Gear Coupling Kit – Gearboxes Shafts & Accessories

• Manufacturer: Siemens

6 in. Industrial Transmission Gear – MRO MRO

• Manufacturer: LENMARK INDUSTRIES

Table w/ Gearbox Motor and Belt Roller – MRO MRO

• Manufacturer: LENMARK INDUSTRIES

Other Specifications Roller length: 36" Table size: 40" x 53" Horsepower: 1/2 hp Voltage: 208-230/460 volts Phase: 3 Notes: Belt drive-in

6 in. Industrial Transmission Gear w/ Seal – MRO MRO

• Manufacturer: LENMARK INDUSTRIES

HANSEN 13:1 Ratio, 495 hp Parallel Shaft Gear Reducer RDF21F-BN-12.5 – Gearboxes – 13:1 , 495 hp, 2.5 inches , 5.5 inches

• Manufacturer: Hansen

Ratio: 13:1 | Hp rating: 495 hp | Input shaft size: 2.5 inches | Output shaft size: 5.5 inches | Made in: CANADA

76:18 Western Gear Reduer

- 76: 18 Western Gear Reduer

2000 MEGATECH WMS4

• Manufacturer: MEGATECH

Overview: Gearbox Ratio: 40/1 | Made in: CANADA | Maker: Renold