Used Weaving in Overijssel, Netherlands

2006 4x Dornier - AWSE 4/E airjet looms, ww 540 cm

• Manufacturer: Dornier

Location: Germany with FT panel Stäubli cam 6K installed 4 colour machines warp stop motion EWL elec. warp let off ECT elec. fabric winding 4 heddle frames 4 weft feeder IRO Superelf X2 1 warp beam Ø 1100 mm Q4 B...

2007 2x Dornier - rapier looms type PTS-4/S and PTS-6/S, ww 300 cm

• Manufacturer: Dornier

nominal width 300 cm panel 2 with Stäubli dobby type S2668/2 8 levers installed PSL pneumatic shaft link 4 colour machine 4 ECS 4 weft feeders type Chrono X2 with EFC yarn insert brake warp stop motion 4 heddle f...

2015 3x Officina Master - SP fabric brushing unit

Two roller sets above each other are cleaning the fabric. The roller width is 2200 mm. Each set of rollers has 2 rollers: 1 beating roller (vain roller) and a brushing roller. Both rollers are covered for the suc...

1991 Dornier - HTV8/SD, ww 190 cm

• Manufacturer: Dornier
• Model: HTV

AT panel Stäubli Dobby type 2667 20 levers installed 8 colour machine, but running on 1 colour 1 weft feeder warp stop motion 6 heald frames 1 warp beam Ø940mm big roll batcher with weavers bridge 1 x Dornier HTV...

10000x TTM-Holland Warehouse (Enschede-NL)

An impression of our warehouse in Enschede. We have a floor area of more than 6500 m2.

Krögel - Stijgdokwikkelaar

Krögel stijgdokwikkelaar, werkbreedte 300 cm lage constructie, met changering en weversbrug.

Knotex - Knoopgestel type KR-1 ww 200

Serienummer 0688 met podest (Eystrup)

Knotex - knotting group

Knotex knotting group for Knotex machines These knotting modules are for in a knotting machine. This are only parts, it does not include the knotting machine. No. 4 is no longer available.

Knotex - Knotting frame

Knotex knotting frame type KR-1, 340/40 cm, serial 2507, Ww 340 cm

Fischer-Poege - Knoopgestel

• Manufacturer: Fischer Poege

Fischer-Poege knoopgestel voor FA series, L = 200cm

Genkinger - HR-25 A-frame transport trolley

• Manufacturer: Genkinger

Genkinger HR-25 A-frame transport trolley Max. lifting cap. 2500 kg. Serial 203.0256 Year 2003

10x Crealet / Willi Grob - warp feeding system

• Manufacturer: Grob

Location: Enschede, The Netherlands Type KAST/Digikast max. working width 220 cm (rollers width ca. 240 cm) max. warp beam Ø 1000 mm take up square 45×45 mm tension control over dancer roller and sensor including...

2005 Jakob Müller - warper, type MW 1000 U

• Manufacturer: Muller

Location: Warehouse TTM Holland For the warping of elastic and non-elastic yarns on warp bobbins and beams, For warp knitting, narrow weaving, etc. Max. flange Ø 1000 mm, max. beam width 1000 mm, (max Ø 40”, max ...

Rius - sectional warper, type Eurotronic-3700

max. working width 3700 mm, max beam Ø 1000 mm let off creel with 360 ends (2 x 36 x 5 ends) trolley type double disc yarn brake system pitch of the creel 300 mm cross reed section waxing device touch screen pane...

Sulzer - projectile loom P7100 B 280 N2 EP Q D1

• Manufacturer: Sulzer
• Model: P7100

cam motion 6 levers installed 2 colours, elec. warp let off elec. weft tensioner 6 heald frames 1 full warp beam Ø 1000 mm 2 weft feeders IRO/Roj side tuckers installed, center tucker big roll batcher 1 pc. Sulze...