- Trusted Seller
1979 HAHN&KOLB ZL 800 H
- Manufacturer: Hahn+Kolb
- Model: ZL 800
Double-sided fine grinding machine, modernized 2004 - Machine was retrofitted with a SIEMENS PLC control system by STÄHLI Germany in 1998. retrofitted. The setting of all processing parameters, time intervals, p...
Metzingen, Germany - Trusted Seller
1974 HAHN&KOLB ZL 800 H
- Manufacturer: Hahn+Kolb
- Model: ZL 800
Double-sided lapping and fine grinding machine, wheel Ø 800 mm - HAHN & KOLB / LAUER measuring & control device with sensor guided through the hollow spindle. The sensor measures continuously during the work proc...
Metzingen, Germany - Trusted Seller
1976 HAHN&KOLB ZL 800 H
- Manufacturer: Hahn+Kolb
- Model: ZL 800
Double-sided lapping and fine grinding machine, wheel Ø 800 mm - HAHN & KOLB / LAUER measuring & control device with sensor guided through the hollow spindle. The sensor measures continuously during the work proc...
Metzingen, Germany - Trusted Seller
1975 HAHN&KOLB ZL 800 H
- Manufacturer: Hahn+Kolb
- Model: ZL 800
Double-sided lapping and fine grinding machine, wheel Ø 800 mm - HAHN & KOLB / LAUER measuring & control device with sensor guided through the hollow spindle. The sensor measures continuously during the work proc...
Metzingen, Germany - Trusted Seller
2012 KELLENBERGER 1500U BEMA Aktuell VISION
- Manufacturer: Kellenberger
- Model: 1500U
- Grinding length: 1,500 millimeter
High-End Kellenberger 1500U Ideal for spindle manufacturers or spindle overhaulers -BEMA internal grinding unit with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interl...
Stuttgart, Germany - Trusted Seller
2010 KELLENBERGER KEL-VITA mit Lader
- Manufacturer: Kellenberger
Completely mechanically overhauled. Including grinding and setup on a single part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Tu...
Stuttgart, Germany - Trusted Seller
2003 STUDER S145
- Manufacturer: Studer
- Model: S145
CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external...
Stuttgart, Germany - Trusted Seller
1992 DISKUS DDS 600 III PRM-CNC
- Manufacturer: Diskus
- Model: DDS 600
CNC double sided grinding machine with round feed - SIEMENS CNC control SINUMERIK 810 G with screen, for 4 axes ( infeed top and bottom, dresser and workpiece and workpiece concentricity), direct input of all gri...
Metzingen, Germany - Trusted Seller
2006 LODI(I) RVP 800 2TG CNC
- Manufacturer: Lodi
CNC vertical double rotary table surface grinding machine, measuring system - LODI CNC control T 2010 for (Z) Grinding head infeed, (Y) grinding head position change left right, (X) dressing amount and speed, (W,...
Metzingen, Germany - Trusted Seller
2008 KELLENBERGER KEL-VISTA UR 175/1000
- Manufacturer: Kellenberger
- Model: Kel-Vista UR175/1000
- Grinding length: 1,000 millimeter
Very well-maintained machine The machine will receive a full service. Additionally, new geometry according to manufacturer standards -New grinding spindle bearings -Grinding spindle motor overhauled -Internal gri...
Stuttgart, Germany - Trusted Seller
2002 KELLENBERGER Kel-Varia UR225-1500 1-2-6-7
- Manufacturer: Kellenberger
- Model: Kel-Varia UR225/1500
EQUIPMENT -T1 500mm grinding wheel diameter -T2 400mm grinding wheel diameter -T6 internal grinding device -T7 internal grinding device -9.8kW water-cooled spindle motor -Marposs tool measurement -Active longitud...
Stuttgart, Germany - Trusted Seller
2002 KELLENBERGER KEL-VARIA UR175-1000 BEMA 12-3
- Manufacturer: Kellenberger
- Model: Kel-Varia UR175/1000
- Grinding length: 1,000 millimeter
Photos of an identical machine with a center height of 225 mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 UR grinding head with T1-T2-T3 Basic equipment: -T1 500 mm grinding wheel diameter -T2 400 mm grindi...
Stuttgart, Germany
Tip: Enter manufacturer, model or keyword