Farmingdale, NJ
Tektronix 8010-DTB-220^
new
- Manufacturer: Tektronix
The Model 8010-DTB is used to test 2-terminal axial-lead devices and 3-terminal devices in a TO-247 package. This test board is used with Keithley Instrument Models 8010 High Power Device Test Fixture and 8011 Hi...
$797 USDFarmingdale, NJ
Tektronix PED4001^
new
- Manufacturer: Tektronix
- Model: PED4001
The PED3200 and PED4000 series programmable error detectors offer effective multi-channel BER for stressed receiver testing of data communications designs. Available with full or half rate clock inputs. Key perfo...
Tektronix 8020-AHV^
new
- Manufacturer: Tektronix
The Model 8020-AHV Kelvin Agilent HV Triaxial Connector Card provides high voltage triaxial connections for sense and force connections on the Model 8020 High Power Interface Panel. Use this connector to connect ...
Tektronix P390^
new
- Manufacturer: Tektronix
The P390 Merge Cable allows a user to link two, three, or four PG3As to form a logically wider unit. The “merged” unit will function as if it were physically one unit. The P390 Cable works with all current PG3AMo...
$2,835 USDFarmingdale, NJ
Polar Toneohm 700
used
- Manufacturer: Polar
- Model: TONEOHM 700
Polar Toneohm 700 Faults locator 120V 50/60Hz 12VA
$3,950 USDFarmingdale, NJ
$921 USDFarmingdale, NJ
Measurements International 9331G
used
- Manufacturer: International
100m: 100M Ohm | Cal: Calibration Available | As-is: Unit Sold AS-IS
Farmingdale, NJ
Anritsu 32E11805B
used
- Manufacturer: Anritsu
Mechanical Configuration Disassembling/Assembling Cabinet Removing Feet ( 1 to 8 ) Remove the S1/S2/S3 screws and remove the S3 screw of the rear. Removing around cover 10 Remove the four S1 screws ( 1 to 4 ) and...
Farmingdale, NJ
Anritsu 32E11805A
used
- Manufacturer: Anritsu
Mechanical Configuration Disassembling/Assembling Cabinet Removing Feet ( 1 to 8 ) Remove the S1/S2/S3 screws and remove the S3 screw of the rear. Removing around cover 10 Remove the four S1 screws ( 1 to 4 ) and...
Farmingdale, NJ
Tektronix -PGY-ONFI^
new
- Manufacturer: Tektronix
TEK-PGY-ONFI software provides complete analysis support for DDR2/3 modes of ONFI Bus. This enables design and test engineers to test ONFI interfaces for compliance to timing parameters of the ONFI Bus specificat...
Tektronix TF-BRR-CFD^
new
- Manufacturer: Tektronix
The TF-BRR-CFD test fixture allows you to phase lock frequency between DUT Transmitter Clock, Oscilloscope , and AWG/AFG sources. Converts DUT Transmitter Clock from 66.666MHz to 10MHz. Product Features: Facilita...
$2,247 USDFarmingdale, NJ
Tektronix 2187-4^
new
- Manufacturer: Tektronix
The Keithley 2187-4 Low Thermal Test Lead Kit includes an input Cable with banana terminations, banana extensions, sprung-hook clips, alligator clips, needle probes, and spade lugs to connect the Keithley 2182A t...
$2,995 USDFarmingdale, NJ
Anritsu 32E11806B
used
- Manufacturer: Anritsu
Mechanical Configuration Disassembling/Assembling Cabinet Removing Feet ( 1 to 8 ) Remove the S1/S2/S3 screws and remove the S3 screw of the rear. Removing around cover 10 Remove the four S1 screws ( 1 to 4 ) and...
Farmingdale, NJ
Anritsu 32E11806A
used
- Manufacturer: Anritsu
Mechanical Configuration Disassembling/Assembling Cabinet Removing Feet ( 1 to 8 ) Remove the S1/S2/S3 screws and remove the S3 screw of the rear. Removing around cover 10 Remove the four S1 screws ( 1 to 4 ) and...
Farmingdale, NJ
Agilent - Keysight 44423A Electrical Test Instrument
used
- Manufacturer: Agilent - Keysight
- Model: 44423A
Good condition Agilent - Keysight 44423A Electrical Test Instruments. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword